Deployment of OceanStor ReplicationDirector in the disaster recovery data center solution (geo-redundant mode)

3

OceanStor ReplicationDirector (current major version: V100R003C10) is deployed in the disaster recovery data center solution (geo-redundant mode) in the following manner:
1. You can deploy one piece of OceanStor ReplicationDirector in one data center to centrally manage the local production center, local disaster recovery center, and remote disaster recovery center, or you can deploy one at the local disaster recovery center and one at the remote disaster recovery center to achieve disaster recovery management.
2. When deploying one piece of OceanStor ReplicationDirector, you are advised to deploy it at the disaster recovery center that provides the fastest service recovery services. Ensure that the management server can communicate through the management network with service hosts and storage devices at all three sites.

Other related questions:
Introduction to the application of OceanStor ReplicationDirector in the disaster recovery data center solution (geo-redundant mode)
If the production center fails, the disaster recovery data center solution (geo-redundant mode) uses the remote disaster recovery center to recover services, ensuring business continuity. 1. One piece of OceanStor ReplicationDirector is deployed at both the local disaster recovery center and remote disaster recovery center in order to centrally manage the local production center, local disaster recovery center, and remote disaster recovery center. 2. Replication relationships are established between the storage systems used by host services to achieve both local disaster recovery and remote disaster recovery. Currently, the solution employs parallel replication (synchronous+asynchronous) and cascaded replication (synchronous+asynchronous). This solution can use storage snapshots of protected objects to roll back data, preventing data loss and virus attacks. 3. If the local production site fails, OceanStor ReplicationDirector allows the local disaster recovery site to take over its services. If both the local production site and the local disaster recovery site fail, the data backed up to the remote disaster recovery site can be used to quickly recover services. 4. The solution supports the following disaster recovery technologies: cascaded connection in synchronous + asynchronous mode for replication, parallel connection in synchronous + asynchronous mode for replication, cascaded connection in asynchronous + asynchronous mode for replication, parallel connection in asynchronous + asynchronous mode for replication, and active-active (VIS) + asynchronous replication (array).

Applications scenarios supported by OceanStor ReplicationDirector in the disaster recovery data center solution (geo-redundant mode)
The disaster recovery data center solution (geo-redundant mode) supports the following applications: Mainstream databases: Oracle (RAC), Microsoft SQL Server (MSFC), and IBM DB2 (VCS and PowerHA) Mainstream application: Microsoft Exchange Server File system: NTFS Others: LUNs

Deployment modes of OceanStor ReplicationDirector in the disaster recovery data center solution (active-passive mode)
OceanStor ReplicationDirector (current major version: V100R003C10) is deployed in the disaster recovery data center solution (active-passive mode) in the following manner: 1. You can deploy one piece of ReplicationDirector in either center to centrally manage the production and disaster recovery centers or deploy one piece of ReplicationDirector at each center to perform disaster recovery management. 2. When deploying only one piece of OceanStor ReplicationDirector, you are advised to deploy it at the disaster recovery center and ensure that the management server can communicate through the management network with service hosts and storage devices at the production center.

Deployment mode of OceanStor ReplicationDirector in the data center disaster recovery solution (active-active mode)
Deploy one piece of OceanStor ReplicationDirector to manage disaster recovery services in the active-active data centers. Deploy OceanStor ReplicationDirector at the active-active disaster recovery center and ensure that the service system at the active-active production center can communicate with the storage management network.

Introduction to OceanStor ReplicationDirector in the data center disaster recovery solution (active-active mode)
The solution uses the VIS mirror function to mirror host services from the production center to the remote disaster recovery center. This achieves disaster recovery protection at zero RPO and RTO. This solution also supports the tri-mirror function, enhancing data reliability and can use VIS snapshots of protected objects to roll back data, preventing data loss and virus attacks. 1. The solution uses the VIS mirror function to mirror host services from production center 1 to production center 2. Both data centers work concurrently to share service loads, improving disaster recovery service capability and system resource utilization. The data centers are mutually backed up. If one data center fails, the other takes over its services, ensuring business continuity. 2. In this solution, deploy one piece of OceanStor ReplicationDirector to manage disaster recovery services in the active-active data centers. You are advised to deploy OceanStor ReplicationDirector at the active-active disaster recovery center. The OceanStor ReplicationDirector Agent automatically detects the applications on hosts and the storage systems used by the applications. The OceanStor ReplicationDirector Server automatically identifies the configurations of the active-active disaster recovery solution and formulates disaster recovery protection policies. 3. This solution supports the active-active (VIS) technology.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top