How do I make the modified label distribution mode take effect immediately on the AR router

15

Run the reset mpls ldp command to reset LDP instances of public networks.

Other related questions:
How do I make modifications effective after the tag distribution mode is modified
Run the reset mpls ldp command to reset LDP instances of public networks.

Configure the immediate mode for configurations to take effect immediately
Run the system-view immediately command in the user view to enter the system view and edit configurations in validation mode. In immediate mode, the configuration takes effect immediately after you run a configuration command and press Enter. # Configure the immediate mode. system-view immediately

How does the extended routing entry resource mode take effect on an S series switch
Q: Why do some packets still fail to be forwarded after the extended routing entry resource mode is configured to address the problem of excess routing entries? A: After running the assign resource-mode command to configure the extended routing entry resource mode on a card, you must reset the card for the configuration to take effect.

Configure port mirroring on the S1728GWR-4P switch
Configure port mirroring on an S1728GWR-4P switch as follows: 1. Choose Interface > Port > Mirror and select Add from the Action drop-down list box. 2. Configure Source Port, Target Port, and Type. 3. After completing the configuration, click Apply. Select Show/Delete from the Action drop-down list box to check the current port mirroring configuration.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top