Planning network segments before software installation of OceanStor 9000 V100R001C01

0

Network segments are planned for all IP addresses of OceanStor 9000 before software installation of OceanStor 9000 V100R001C01. This operation is required only when the configuration file is unavailable.

Other related questions:
Planning network segments for OceanStor 9000 V100R001C01
Before software installation of OceanStor 9000 V100R001C01, independent network segments are planned, including the front-end service network segment, back-end storage network segment, and management network segment. For details, see OceanStor 9000 V100R001C01 Software Installation Guide 12 .

Preparing tools before software installation of OceanStor 9000 V100R001C01
Tools to be prepared before software installation of OceanStor 9000 V100R001C01 include: - SSH client (such as PuTTY) - HyperTerminal (such as PuTTY) - FTP file upload tool (such as FileZilla)

Preparing cables before software installation of OceanStor 9000 V100R001C01
Cables to be prepared before software installation of OceanStor 9000 V100R001C01 include: - One network cable, used to connect an installation PC to a target device - One RS-232 serial cable, used to configure switches - One USB-to-serial port cable if the installation PC has no serial ports

Typical networking plans of OceanStor 9000 V100R001C01
OceanStor 9000 V100R001C01 supports the following typical networking plans: 1. 10GE front-end and 10GE back-end 2. 10GE front-end and GE back-end 3. InfiniBand front-end and InfiniBand back-end 4. 10GE front-end and InfiniBand back-end In the preceding four networking scenarios, the networking tool automatically generates a network plan, hardware connection diagram, and connection table.

Purpose of recording node SNs before software installation of OceanStor 9000 V100R001C01
Before software installation of OceanStor 9000 V100R001C01, storage node SNs are recorded in the configuration file, because during the subsequent installation process, the installation program identifies each storage node using its unique SN and assigns a specific IP address to the storage node.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top