Does an AR support two uplink interfaces in load balancing mode

0

If an AR has two WAN interfaces configured, the two uplink interfaces work in load balancing mode.
1. Configure two equal-cost static routes.
2. Configure policy-based routing to change the forwarding path of packets.

Other related questions:
Check whether the AR routers support dual-uplink load balancing
As long as there is a double-WAN interface,it support dual-uplink load balancing: 1 Configure two equal-cost static routes. 2 By configuring the policy-based routes for different users through different carriers.

Does an AR support multiple outbound interfaces
Multiple outbound interfaces of AR routers are configured as follows: 1. The AR150 series routers support dual WAN access. Some AR models provide two electrical interfaces as WAN interfaces, while other models provide only one electrical interface as the WAN interface. To implement dual WAN access, LAN interface FE0 must be used as a Layer 3 interface. - Types of WAN interfaces: AR151, AR151W-P, AR151G-HSPA+7, and AR151G-C: FE electrical interface AR156 and AR156W: ADSL-B/J interface AR157, AR157W, AR157VW, and AR157G-HSPA+7: ADSL-A/M interface AR158E and AR158EVW: G.SHDSL Interface - LAN interface FE0 can be used as a WAN interface. 2. The AR160 series routers support dual WAN access. - Types of WAN interfaces: AR162F: SA interface AR168F: G.SHDSL interface AR169F, AR169FVW, and AR169FGVW-L: VDSL2 interface The AR160 series has a GE combo interface functioning as a WAN interface. - LAN interface GE0 can be used as a WAN interface. 3. The AR200 series routers support dual WAN access. - Types of WAN interfaces: AR201 and AR201VW-P: FE electrical interface AR206: ADSL-B/J interface AR207, AR207V, AR207VW, AR207V-P, and AR207G-HSPA+7: ADSL-A/M interface AR208E: G.SHDSL interface - LAN interface FE0 can be used as a WAN interface. 4. The AR1200 series routers support dual WAN access even without an expansion card installed. 5. The AR2200 series routers support dual WAN access on fixed interfaces. 6. The AR3200 series routers support dual WAN interfaces.

Does an AR support dual uplinks in active and standby mode
An AR with dual WAN interfaces configured can support two uplink interfaces in active and standby mode. 1. Configure two static routes with different priorities. Generally, the data flow is sent out through the active link with a high priority. It is sent out through the backup link with a low priority only after a fault occurs on the active link. 2. Configure policy-based routing. Generally, the data flow is sent out through the active link through on policy-based routing. It is sent out through the standby link based on the default route in the routing table after a fault occurs on the active link.

Does the AR router support intelligent load balancing
The AR router does not support intelligent load balancing.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top