Typical cabinet CONFIGURE of OceanStor 9000

0

In the typical CONFIGURE, nodes in a basic cabinet are connected to switches in this cabinet using network cables and SFP+ cables. Nodes in an expansion cabinet are connected to switches in the basic cabinet using network cables and optical fibers. Deploy nodes from bottom to top in a cabinet.

Other related questions:
Typical configuration of OceanStor 9000 V100R001C01
10GE networking is used for the typical configuration of OceanStor 9000 V100R001C01. - A fully configured Performance node cabinet contains 12 storage nodes, two 10GE switches, one GE switch, and one KVM. - A fully configured Mini-capacity node cabinet contains 12 storage nodes, two 10GE switches, one GE switch, and one KVM. - A fully configured Capacity node cabinet contains eight storage nodes, two 10GE switches, one GE switch, and one KVM.

Cabinets used by OceanStor 9000 V100R001C01
The FR42611 and FR42612L cabinets are recommended for OceanStor 9000 V100R001C01.

Typical disk CONFIGUREs of the OceanStor 9000 V100R001C01 M node
The typical disk CONFIGUREs of the OceanStor 9000 V100R001C01 M node are as follows: - 2 x 300 GB 2.5-inch back-end operating system disks (SAS) - 1 x 200 GB 3.5-inch service disk (SSD) installed in slot 0 - 11 x 2 TB 3.5-inch service disks (SATA) installed in slots 1 to 11

Typical disk CONFIGUREs of the OceanStor 9000 V100R001C01 C node
The typical disk CONFIGUREs of the OceanStor 9000 V100R001C01 C node are as follows: - 2 x 300 GB 2.5-inch back-end operating system disks (SAS) - 1 x 200 GB 3.5-inch service disk (SSD) installed in slot 0 - 35 x 4 TB 3.5-inch service disks (SATA) installed in slots 1 to 35

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top