Functions of clients on the OceanStor 9000 management network

The OceanStor 9000 network consists of the following: - A front-end service network that connects OceanStor 9000 to the customer's network - A back-end storage network that interconnects OceanStor 9000 nodes - A management network that connects OceanStor 9000 to the customer's maintenance network OceanStor 9000 supports multiple networking modes, including 10GE, InfiniBand, and GE networking to meet different network requirements.

Management ports in OceanStor 9000 V100R001C01 include NIC0 and IPMI ports. NIC0 ports are used for logging in to system management software, as well as configuring, maintaining, and monitoring the system. IPMI ports on each node are used for hardware system management, including viewing hardware component status and remotely powering on or off nodes. The entire system uses only NIC0 ports on the first three nodes, and one floating management IP address (floating on the NIC0 ports on the three nodes) is planned. An IP address is separately planned for the IPMI port on each node.