Two dynamic and two static IP addresses for OceanStor 9000 networks

0

OceanStor 9000 uses two static IP addresses to mount clients for CIFS sharing and uses two dynamic IP addresses to mount clients for NFS sharing. OceanStor 9000 provides the load balancing function, enabling you to mount clients to static or dynamic domain names instead of IP addresses.

Other related questions:
Method used to configure two network segments on the USG firewall among which one network segment contains IP addresses dynamically allocated by the DHCP server and another network segment contains static IP addresses
You can configure two network segments on the USG firewall among which one network segment contains IP addresses dynamically allocated by the DHCP server and another network segment contains static IP addresses as follows: Two methods are available: 1. If the switch interconnected to the firewall has only one interface, configure two IP addresses for the interface, set the primary IP address as the dynamic IP address and the secondary IP address (sub address) as the static IP address. The key configuration is as follows: [USG] interface GigabitEthernet0/0/1 [USG-GigabitEthernet0/0/1] ip address 192.168.2.1 255.255.255.0 [USG-GigabitEthernet0/0/1] ip address 192.168.1.1 255.255.255.0 sub [USG-GigabitEthernet0/0/1] quit [USG] dhcp server ip-pool 0 [USG-dhcp-0] network 192.168.2.0 mask 255.255.255.0 [USG-dhcp-0] dns-list 192.168.2.3 [USG-dhcp-0] quit IP addresses in network segment 192.168.2.0 can be dynamically allocated. IP addresses in network segment 192.168.1.0 are static IP addresses set on the PC. 2. If the switch is interconnected with the firewall over interfaces in different network segments, the addresses can be configured flexibly. a. Configure the DHCP address pool by configuring the L3 interface. [USG] interface GigabitEthernet0/0/1 [USG-GigabitEthernet0/0/1] ip address 192.168.2.1 255.255.255.0 [USG-GigabitEthernet0/0/1] quit [USG]interface GigabitEthernet0/0/2 [USG-GigabitEthernet0/0/2] ip address 192.168.1.1 255.255.255.0 [USG-GigabitEthernet0/0/2] quit [USG] dhcp server ip-pool 0 Configure an address pool for network segment 192.168.2.0 instead of network segment 192.168.1.0, and configure static IP addresses on the PC. [USG-dhcp-0] network 192.168.2.0 mask 255.255.255.0 [USG-dhcp-0] dns-list 192.168.2.2 [USG-dhcp-0] quit b. Configure the DHCP address pool based on interfaces. [USG] interface GigabitEthernet1/0/1 [USG-GigabitEthernet1/0/1] ip address 192.168.0.1 255.255.255.0 Configure the interface IP address. [USG-GigabitEthernet1/0/1] dhcp select interface //Configure the interface-based DHCP. [USG-GigabitEthernet1/0/1] dhcp server ip-range 192.168.0.1 192.168.0.254 //Configure the range of IP addresses that can be allocated. [USG-GigabitEthernet1/0/1] dhcp server gateway-list 192.168.0.1 [USG-GigabitEthernet1/0/1] dhcp server dns-list 192.168.0.253 [USG-GigabitEthernet1/0/1] quit [USG] interface GigabitEthernet0/0/2 [USG-GigabitEthernet0/0/2] ip address 192.168.1.1 255.255.255.0 Configure the interface IP address and configure static IP addresses in this network segment instead of DHCP.

Maximum number of dynamic IP addresses supported by OceanStor 9000 InfoEqualizer
The maximum number of dynamic IP addresses supported by OceanStor 9000 InfoEqualizer is 1024.

Functions of OceanStor 9000 V100R001C01 front-end dynamic IP address
The front-end dynamic IP address of OceanStor 9000 V100R001C01 is used for clients to mount and access NAS.

Concept of a dynamic front-end service IP address of OceanStor 9000
Dynamic front-end service IP address: An IP address dynamically allocated to a node by the InfoEqualizer from the manually configured dynamic IP address pool. After a node fails, its dynamic IP address is automatically assigned to another node, and a client can access OceanStor 9000 through this dynamic IP address.

Method used to configure two IP addresses for an interface on the USG firewall and set the primary IP address as the dynamic IP address allocated by the DHCP gateway
You can configure two IP addresses for an interface on the USG2000, USG5000, and USG6000 and set the primary IP address as the dynamic IP address allocated by the DHCP gateway as follows: Note: The SUB address can only be configured as a static IP address of the PC. [USG]interface GigabitEthernet0/0/1 [USG-GigabitEthernet0/0/1]ip address 192.168.2.1 255.255.255.0 [USG-GigabitEthernet0/0/1]ip address 192.168.1.1 255.255.255.0 sub [USG-GigabitEthernet0/0/1]quit [USG] dhcp server ip-pool 0 [USG-dhcp-0]network 192.168.2.0 mask 255.255.255.0 [USG-dhcp-0]dns-list 192.168.2.3 [USG-dhcp-0] quit IP addresses in network segment 192.168.2.0 can be dynamically allocated. IP addresses in network segment 192.168.1.0 are static IP addresses set on the PC.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top