OceanStor 9000 network architecture

0

The OceanStor 9000 network consists of the following:
- A front-end service network that connects OceanStor 9000 to the customer's network
- A back-end storage network that interconnects OceanStor 9000 nodes
- A management network that connects OceanStor 9000 to the customer's maintenance network
OceanStor 9000 supports multiple networking modes, including 10GE, InfiniBand, and GE networking to meet different network requirements.

Other related questions:
Introduction to OceanStor 9000 V100R001C01 software architecture
The software architecture of OceanStor 9000 V100R001C01 is as follows: The software architecture is fully symmetric with WushanFS run on all storage nodes. Metadata is evenly distributed to eliminate performance bottlenecks. OceanStor 9000 supports the seamless flexible expansion of 3 to 288 storage nodes and enables file system capacity to be expanded up to 40 PB. OceanStor 9000 provides NFS, CIFS, and FTP services, enabling clients running different operating systems to share files. Two types of client authentication modes are supported, local authentication and domain server authentication based on Active Domain (AD), Lightweight Directory Access Protocol (LDAP), and Network Information Service (NIS). Administrators can securely access DeviceManager and OceanStor SystemReporter (an optional report tool) to manage system resources and monitor system status and performance through HTTPS.

OceanStor 9000 networking
OceanStor 9000 separates the front-end and back-end networks and uses the front-end network for data exchange with customers, and the back-end network for data exchange among internal nodes. OceanStor 9000 supports the following typical networking modes: 1. 10GE front-end/back-end (recommended) 2. InfiniBand front-end/back-end (mainly for HPC scenarios) 3. 10GE front-end and InfiniBand back-end 4. GE front-end and 10GE back-end (for video surveillance and archiving scenarios)

Software architecture of OceanStor ReplicationDirector
      Web,Storage,Mobile,OceanStor V3 series,OceanStor T series Based on the B/S architecture, OceanStor ReplicationDirector (current major version: V100R003C10) provides disaster recovery management through the browser at the client. OceanStor ReplicationDirector consists of three subsystems: OceanStor ReplicationDirector Agent, OceanStor ReplicationDirector UI, and OceanStor ReplicationDirector. 1. OceanStor ReplicationDirector Agent Installed on a service host, OceanStor ReplicationDirector Agent is used to discover applications on hosts, maintain consistency of application data, and recover applications. It also transfers information about application systems to the OceanStor ReplicationDirector Server, helping system administrators manage and configure data protection and disaster recovery tasks. 2. OceanStor ReplicationDirector UI Installed on a disaster recovery management server, OceanStor ReplicationDirector UI is used to provide a GUI, where you can perform routine management, such as configuration, maintenance, and modification. 3. OceanStor ReplicationDirector Server Installed on a disaster recovery management server, OceanStor ReplicationDirector Server is used to control the disaster recovery service process, schedule disaster recovery policies, and manage disaster recovery resources and disaster recovery configuration data. [OceanStor ReplicationDirector][Architecture|Component|Subsystem][Contain|Consist of?][Which|What|How much|How many?] 1      

OceanStor 9000 networking assistant
Huawei Storage Networking Assistant is a webpage-based tool, providing networking diagrams of different CONFIGUREs. You only enter the network CONFIGURE information based on your requirements to QUICK obtain the desired networking diagram and connect cables without the need to remember complicated networking plans and rules. Click Huawei Storage Networking Assistant to obtain the tool.

Four networking modes of OceanStor 9000
OceanStor 9000 provides the following four networking modes: - 10GE front-end and 10GE back-end - GE front-end and 10GE back-end - InfiniBand front-end and InfiniBand back-end - 10GE front-end and InfiniBand back-end OceanStor 9000 provides flexible networking modes to protect customers�?existing network architectures. Customers do not have to build new or adjust existing network architectures after buying Huawei OceanStor 9000. This reduces maintenance costs for customers and improves their competitiveness in the market.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top