Homepage FAQ Storage

Number of stack cables among switches on OceanStor 9000 V100R001C01

CE6810 switches are stacked through 40GE QSFP+ high-speed cables. The number of cables varies with the number of the OceanStor 9000 nodes.
CONFIGURE principles are as follows:
- Configure two cables if a cluster contains 3 to 16 nodes.
- Configure three cables if a cluster contains 17 to 24 nodes.
- Configure four cables if a cluster contains 25 to 31 nodes.
If the number of cluster nodes is greater than or equal to 32, use CE12800 switches instead of CE6810.

Other related questions:

Number of PDU outputs of OceanStor 9000 V100R001C01

OceanStor 9000 V100R001C01 provides 25 PDU outputs configured as follows: - 16 outputs from the IEC60320 C13 power socket - 9 outputs from the IEC60320 C19 power socket

OceanStor 9000 V100R001C01

For details about OceanStor 9000 V100R001C01, see OceanStor 9000 V100R001C01 Product Documentation.

Preparing cables before software installation of OceanStor 9000 V100R001C01

Cables to be prepared before software installation of OceanStor 9000 V100R001C01 include: - One network cable, used to connect an installation PC to a target device - One RS-232 serial cable, used to configure switches - One USB-to-serial port cable if the installation PC has no serial ports

Maximum number of nodes in an OceanStor 9000 V100R001C01 cluster

Maximum number of nodes in an OceanStor 9000 V100R001C01 cluster: 288

Maximum number of files in OceanStor 9000 V100R001C01

Maximum number of files (including directories) in OceanStor 9000 V100R001C01: 10 billion