Method used to allocate and deploy the back-end IP address of OceanStor 9000 V100R001C01

0

During the software deployment phase, the back-end IP address of OceanStor 9000 V100R001C01 is entered in the deployment template and automatically allocated.

Other related questions:
Typical networking plans of OceanStor 9000 V100R001C01
OceanStor 9000 V100R001C01 supports the following typical networking plans: 1. 10GE front-end and 10GE back-end 2. 10GE front-end and GE back-end 3. InfiniBand front-end and InfiniBand back-end 4. 10GE front-end and InfiniBand back-end In the preceding four networking scenarios, the networking tool automatically generates a network plan, hardware connection diagram, and connection table.

Functions of OceanStor 9000 V100R001C01 front-end dynamic IP address
The front-end dynamic IP address of OceanStor 9000 V100R001C01 is used for clients to mount and access NAS.

Planning of IP addresses on OceanStor 9000 10GE network
For details about the planning of IP addresses on the OceanStor 9000 V100R001C01 10GE network, see OceanStor 9000 V100R001C01 Planning Guide.

Planning of IP addresses on the OceanStor 9000 InfiniBand network
For details about the planning of IP addresses on the OceanStor 9000 V100R001C01 InfiniBand network, see OceanStor 9000 V100R001C01 Planning Guide.

Method used to recover data on OceanStor 9000 V100R001C01
Based on failed objects and data recovery triggering conditions, OceanStor 9000 V100R001C01 recovers data using two methods: ensuring zero data loss on the original disk or node and writing the data in a failed disk or node to other normal disks or nodes through calculations.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top