AR through NAT and redirection to implement dual-egress, And provides web service

5

The method of configuring dual-outbound interface policy routing on an AR router is as follows:
For details, see the URL: Example for Configuring NAT and Redirection to Implement Two Egresses and Provide the Web Service.

Other related questions:
How to configure redirection through the web platform on the AR
AR series routers do not support the configuration of redirection through the web platform.

How do I connect the NAT server on the AR router to two uplinks
A Huawei AR router provides dual egresses of the NAT server. The web server uses internal IP address 192.168.0.100/24 and port 8080. The IP address of GE2/0/0 (outbound interface) on the router is 202.10.1.2/24, and the IP address of GE3/0/0 is 201.10.1.2/24. The configuration is as follows: 1. Assign IP addresses to interfaces on the router. [Huawei] interface Ethernet0/0/0 [Huawei-Ethernet0/0/0] ip address 192.168.0.1 24 [Huawei-Ethernet0/0/0] quit [Huawei] interface GigabitEthernet2/0/0 [Huawei-GigabitEthernet2/0/0] ip address 202.10.1.2 24 [Huawei-GigabitEthernet2/0/0] quit [Huawei] interface GigabitEthernet3/0/0 [Huawei-GigabitEthernet3/0/0] ip address 201.10.1.2 24 [Huawei-GigabitEthernet3/0/0] quit 2. Configure the NAT server and outbound NAT in Easy IP mode on GE2/0/0 and GE3/0/0. [Huawei] acl number 2000 [Huawei-acl-basic-2000] rule 5 permit source 192.168.0.0 0.0.0.255 [Huawei-acl-basic-2000] quit [Huawei] interface GigabitEthernet2/0/0 [Huawei-GigabitEthernet2/0/0] nat server protocol tcp global 202.10.1.3 www inside 192.168.0.100 8080 [Huawei-GigabitEthernet2/0/0] quit [Huawei] interface GigabitEthernet3/0/0 [Huawei-GigabitEthernet3/0/0] nat server protocol tcp global 201.10.1.3 www inside 192.168.0.100 8080 [Huawei-GigabitEthernet3/0/0] nat outbound 2000 [Huawei-GigabitEthernet3/0/0] quit

Method used to establish an IPSec tunnel through NAT traversal
Huawei AR routers support an IPSec tunnel through NAT traversal. For details about the configuration, see "Example for Establishing an IPSec Tunnel that Traverses NAT Devices" of "Using VPN to Implement WAN Interconnection" in Typical Configuration Examples.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top