How Can I Change the Communication Protocol Between Multiple Data Centers?

34

1.Use PuTTY to log in to the active OMS of the GADC.
Use the opadmin account and Floating management IP address for login. After login, run su - root to switch to user root.

2.Run TMOUT=0 to prevent PuTTY from exiting in a timeout scenario.
3.Run /opt/obs/scripts/mdc/setMdcHttps.sh false to change the communication protocol to HTTP.
4.Perform Step 1 to Step 3 on the active OMS of other data centers.

Other related questions:
How do I change the protocol mode of IAD
You can do as follows: To change to the SIP mode, log in to the web management system, choose Advanced Configuration > Protocol Mode, and select SIP; or log in to the CLI, run the enable and configure terminal commands in sequence to enter the global configuration mode, and run the protocol-mode sip command. To change to the MGCP mode, log in to the web management system, choose Advanced Configuration > Protocol Mode, and select MGCP; or log in to the CLI, run the enable and configure terminal commands in sequence to enter the global configuration mode, and run the protocol-mode mgcp command. NOTE: IAD101H/102H/104H supports only the CLI mode.

Can a Topic Creator Change the Protocol of a Topic?

SMN does not support protocol change of a topic.


How to communicate between IAD132 call messages
IAD registered on the SIP server.Routing calls by SIP server and initiate a call.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top