When Operating OceanStor ReplicationDirector, the Pop-up Page Content Displays Incompletely

3

When operating OceanStor ReplicationDirector, if the pop-up page content displays incompletely, please refresh the page or close and open it again.

Other related questions:
When Operating OceanStor BCManager, the Pop-up Page Content Displays Incompletely
When operating OceanStor BCManager, if the pop-up page content displays incompletely, please refresh the page or close and open it again.

Why is the page displayed incompletely when a user shares a PowerPoint 2003 document
The document is a wide-screen document (document at an aspect ratio of 16:9, 16:10, or 15:9) and has been opened on the local computer. Close the PowerPoint program on your local computer and share the document again

The page for adding or modifying device information on the SMC2.0 web interface is displayed incompletely. What can I do?
The page for adding or modifying device information on the SMC2.0 web interface is displayed incompletely. Resolve this issue as follows: - If the browser is Internet Explorer, press F12 to open the Developer Tools, and change the Compatibility View to IE8. - This issue is caused by the Compatibility View setting of Internet Explorer. If the Compatibility View is disabled, this issue will be resolved. If pressing F12 does not bring the Developer Tools window into the main browser window but the Developer Tools indication appears in the status bar at the bottom, press F12 again, and then press CTRL+P to bring up the Developer Tools window in the lower part. If the 360 browser is used, disable the Compatibility View.

Introduction to OceanStor ReplicationDirector reprotection
If planned migration or fault recovery has been performed for a recovery plan, you can implement reprotection for the recovery plan. Reprotection protects data at the disaster recovery site once devices at the production site recover from disasters, simplifying failback. This operation can be performed only in the disaster recovery management system at the disaster recovery site.

Incomplete web page menu on an AR router
The problem is caused due to insufficient user permissions: The default level of web users is 0, which indicates that the users can only use network diagnosis commands (ping and Tracert) or query basic information. You can improve user permissions using command lines or through the web NMS. 1. Command lines: Configure a user level in the AAA view. [Huawei] aaa [Huawei-aaa] local-user huawei password irreversible-cipher Huawei@123 [Huawei-aaa] local-user huawei service-type http //An account with the login mode containing the HTTP type has the web login permission. [Huawei-aaa] local-user huawei privilege level 15 //Change the user permission to the administrator level. [Huawei-aaa] quit [Huawei] quit In the user view, run the save command to save the configuration, and re-log in to a web page for verification. 2. Web NMS: Log in to the web NMS using the super administrator account, and choose Web-based Configuration > User Management > User Management to change the user permission.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top