The time in an InfraControl report is different from the actual time.

1

Step 1 Check whether the system time of the client is correct. If the time is incorrect, set it to a correct
time.
Step 2 Check whether the system time of the InfraControl server is correct. If the time is incorrect, set
it to a correct time.
Step 3 Check whether the system time zone of the client is the same as that of the InfraControl server.
If they are different, set them to the same time zone.

Other related questions:
Why does the alarm time have an eight-hour difference with the actual time
Set software parameter 350 to 1. Software parameter 350 specifies whether alarms are reported based on the Greenwich Mean Time (GMT) or local time. The options are as follows: ?0: GMT ?1: local time

In the eSpace UC solution, the difference between the alarm reporting time and system time is eight hours. How to resolve this issue?
To solve this problem, two methods are available: ?Using the CLI Run the config softargu type 350 value 1 command to set the value of the software parameter 350 to 1. The software parameter 350 specifies whether alarms are reported based on the Greenwich Mean Time (GMT) or local time. The options are as follows: 0: GMT 1: Local time ?Using the web UI Choose System Management > Time Configuration and modify the time zone. For example, modify the time zone to GMT + 08:00.

How to resolve the issue when the difference between the alarm reporting time and the system time of the U1900 is eight hours?
The U1900 uses either the Greenwich Mean Time or local time to report alarms. Run the config softargu type 478 value X command to modify the software parameter P350 (the default value of which is 0). 0: Greenwich Mean Time 1: Local time

Differences between suppress-time and report-suppress on an S series switch
For S series switches, suppress-time and report-suppress are irrelevant. The suppress-time parameter specifies the period during which the switch forwards only one Report/Leave message of the same multicast group after receiving a Query message. The report-suppress parameter is used to terminate Report messages from users and respond to the Query packets from routers.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top