There are some mistakes Displayed After a User Enters the IP Address in the Address Box of Internet Explorer and Presses Enter.

1

Step 1 Open the Internet Explorer and choose Tools > Internet.
The Internet dialog box is displayed.
Step 2 Click the Security tab. In Select a zone to view or change security settings, select Trusted
Sites and click Sites.
The Trusted Sites dialog box is displayed.
Step 3 Add the APM's IP address to trusted sites.

Other related questions:
Blank Page Is Displayed After a User Enters IP Address of OceanStor ReplicationDirector, in the Address Box of Internet Explorer and Presses Enter
Open the Internet Explorer and choose Tools > Internet. The Internet dialog box is displayed. Click the Security tab. In Select a zone to view or change security settings, select Trusted Sites and click Sites. The Trusted Sites dialog box is displayed. Add IP Address to trusted sites.

Intranet users cannot access the internal server using a domain name, but they can access the internal server using an IP address
Q: Intranet users cannot access the internal server using a domain name, but they can access the internal server using an IP address. A: Ping the domain name and check whether the public IP address can be parsed. If the IP address cannot be correctly parsed, check whether the account password and DNS information are correct. Configure DDNS software on the PC to check whether the IP address can be parsed. If no error is found in the preceding operations, contact the carrier to check the DDNS server. Check whether the DDNS server synchronizes the updated domain name to the DNS server. The causes are as follows: It is used in the scenario where terminals use PPPoE dial-up. The router runs normally when users can access the internal server using IP addresses. DNS resolution is the first step to access a domain name. Because the PPPoE interface dynamically obtains an IP address from a carrier, the DDNS server must send the updated mapping between the domain name and IP address to the DNS server in real time. Check whether the DDNS server synchronizes the updated domain name to the DNS server.

When you create a user or rest a user password after logging in to the RSE6500 using Internet Explorer 8, no password copy link is displayed in the password dialog box that is displayed
Possible Cause: Internet Explorer 8 does not support password duplication by clicking a link. Solution: 1)Select the password and press Ctrl+C to copy the password. 2)If you use another browser, you can click the link to copy the password. For the supported browsers, please search for the questions: Browsers Supported by the RSE6500.

How do I enter the user view on the SC?
To enter the user view on the SC, run the account command.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top