OceanStor BCManager Node Fault

17

1.On a new physical server or VM, install the same version of OceanStor BCManager. For details about the installation, refer to V100R003C10 Product DocumentationOceanStor BCManager V100R005C00 Product Documentation.

After finishing the installation, configure the OceanStor BCManager network information and confirm that the node name, IP address, and other configurations are the same as those of the original OceanStor BCManager.


2.Obtain the latest backup management data.
Backup file save path:

Automatic backup: Go to the backup file save path /root/CloudComputing/DRBackup/OceanStor BCManager management IP address/YYYY-MM-DD/Auto/ConfigData.zip
Manual backup: Go to your local system to obtain the ConfigData.zip file.

3.Import the configuration data into the newly installed OceanStor BCManager.

Other related questions:
OceanStor ReplicationDirector Management Node Fault
1. On a new physical server or VM, install the same version of OceanStor ReplicationDirector. For details about the installation, refer to OceanStor ReplicationDirector V100R003C10 Product Documentation. After finishing the installation, configure the OceanStor ReplicationDirector network information and confirm that the node name, IP address, and other configurations are the same as those of the original OceanStor ReplicationDirector. 2. Obtain the latest backup management data. Backup file save path: o Automatic backup: Go to the backup file save path /root/CloudComputing/DRBackup/OceanStor ReplicationDirector management IP address/YYYY-MM-DD/Auto/ConfigData.zip o Manual backup: Go to your local system to obtain the ConfigData.zip file. 3. Import the configuration data into the newly installed OceanStor ReplicationDirector.

Login to OceanStor BCManager After OceanStor BCManager Server Was Installed, the Add Host Page Is Not Displayed
Reinstall OceanStor BCManager Server and select Application DR management components. For details, refer to Installing OceanStor BCManager Server.

Install the OceanStor BCManager eBackup software
The OceanStor BCManager eBackup software can be deployed on physical machines and virtual machines (VMs). In V200R001C10SPC300 and later versions, the eBackup public cloud scenario supports DMK deployment. For details, see the user guide of the corresponding version. The eBackup user guide can be obtained from the following paths: - OceanStor BCManager V200R001C00 eBackup User Guide. - OceanStor BCManager V200R001C10 CSBS User Guide (Private Cloud, for FusionCloud 6.0.0). - OceanStor BCManager V200R001C10 Cloud Host Backup User Guide (Private Cloud, for FusionCloud NFVI 6.10.1 & FusionCloud V100R002C00SPC500). - OceanStor BCManager V200R001C10 VBS User Guide (Private Cloud, for FusionCloud 6.0.0). - OceanStor BCManager V200R001C10 eBackup Installation and Commissioning Guide (Public Cloud).

Port setting for the OceanStor BCManager eBackup
For details about the port setting requirements of the OceanStor BCManager eBackup, see the Communication Matrix. To obtain the document, visit the following websites: - OceanStor BCManager V200R001C00 eBackup Communication Matrix. - OceanStor BCManager V200R001C10 eBackup Communication Matrix.

Meaning of the floating IP address in OceanStor BCManager eBackup
A floating IP address refers to the IP address that a high availability (HA) system uses to communicate with the external systems. The active server and the standby server have separate IP addresses. For example, the IP address of the active server is IP1 and the IP address of the standby server is IP2. When communicating with the external client, the active or standby server uses another IP address, for example, IP3. IP3 is bound to the network adapter of the active server. At this time, the active server has two IP addresses, IP1 and IP3. The external client communicates with the active server whose IP address is IP3. The standby server has only IP2. Therefore, it does not provide services to the external client. When an active/standby switchover occurs, IP3 is released from the active server and bound to the network adapter of the standby server. This is called floating.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top