How to Resolve The Problem Where Executing the command has timed out Is Displayed During The Deployment Start Phase

8

Restart all clustered nodes of the N8500. Then, start deployment again.

Other related questions:
How to Resolve The Problem Where Failed to configure the in-band environment and some functions are unavailable Is Displayed During The Deployment Start Phase
The causes are as follow. Cause 1: The optical fibers between the clustered NAS engine and the controller enclosure of the storage unit may be loosely connected or not connected. Connect optical fibers correctly. Then, start deployment again. Cause 2: The management IP address assigned to the N8500 and that assigned to the controller enclosure of the storage unit do not belong to the same network segment. Assign IP addresses that reside in the same network segment to the N8500 and the controller enclosure of the storage unit as management IP addresses. Then, start deployment again.

Starting VMs Timed Out When You Execute a Recovery Plan for VMware VMs
1.Log in to vCenter through a vCenter client, select the VM that fails to be started, and view the tasks and events concerning the VM. 2.If error pbm.fault.PBMFault.summary is displayed during VM startup, check the ESXi cluster settings, disable the vSphere DRS setting, and execute the recovery plan again. After the recovery plan is completed, you can enable the vSphere DRS setting the ESXi cluster based on actual requirements.

How do I change the conference start time on the SMC2.0?
Change the conference start time on the SMC2.0 as follows: 1. Scheduled conference: Log in to the SMC2.0, view conferences that are in progress or have not started on the Scheduled Conference page, select a conference in Conference Name, click the Edit icon in the upper right corner, and change the conference start time. 2. Conference saved as a conference template: Log in to the SMC2.0, choose Conferences > Conferences Template, find a conference saved as a conference template, and change the conference start time on the Edit Conference Template page.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top