RH5885 V3 NICs

4

The RH5885 V3 can be configured with a GE or 10GE NIC, which provides four GE or two 10GE network ports respectively. The NICs support NC-SI.

Other related questions:
Difference between the RH5885 V2, RH5885 V3, and RH5885H V3
Visit http://support.huawei.com/huaweiconnect/enterprise/thread-230857.html.

What is the function of the NIC in the RH2288 V3
The RH2288 V3 supports one GE NIC with two or four GE ports, or supports one 10GE NIC with two 10GE electrical or optical ports or with two GE electrical ports and two 10GE optical ports. Both NICs support the Network Controller Sideband Interface (NC-SI). The RH2288 V3 supports a 56GE NIC with two 56GE IB optical ports. The NIC does not support NC-SI.

What is the function of the NIC in the RH1288 V3
The RH1288 V3 supports one GE NIC with two or four GE ports, or supports one 10GE NIC with two 10GE electrical or optical ports or with two GE electrical ports and two 10GE optical ports. Both NICs support the Network Controller Sideband Interface (NC-SI). The RH1288 V3 supports a 56GE NIC with two 56GE IB optical ports. The NIC does not support NC-SI.

RH5885 V3 support for 32-bit OSs
The RH5885 V3 and RH5885H V3 support only 64-bit OSs.

Differences between the 4-socket RH5885 V2 and 8-socket RH5885 V2
An 8-socket RH5885 V2 server is made up of two 4-socket RH5885 V2 servers connected through four QPI cables. One of the 4-socket RH5885 V2 servers serves as the master node and the other as the slave node. Hardware differences: ? Rear I/O module: For the 4-socket server, the rear I/O module can be configured with two hard disks and the QPI cables cannot be connected. For the 8-socket server, the rear I/O module cannot be configured with two hard disks and the QPI cables are required. ? Hard disk quantity: 10 (4-socket server); 16 (8-socket server) ? CPU configuration: The 8-socket server must be configured with all CPUs and the 4-socket server can be configured with two or four CPUs. ? DIMM configuration: For the 4-socket server, DIMMs must be symmetrically installed on the memory risers. For the 8-socket server, apart from the symmetry requirements, the DIMMs must be installed on two nodes and the DIMM configuration must be the same on the two memory risers. ? RAID configuration: The 8-socket server requires only one RAID controller card, which must be installed on the master node. Software differences: ? The slave node of the 8-socket server has no BIOS. Therefore, no BIOS information is displayed on iMana. ? The power button on the front panel of the slave node of the 8-socket server is available, but there is no related power control page on the iMana WebUI. ? The iMana of the slave node of the 8-socket server does not provide black box, power-on strategy, system start strategy, and serial port switchover functions.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top