RH5885 V2 altitude specifications

3

RH5885 V2 altitude specifications:
�?3048 m (10,000 ft). The temperature decreases by 1°C as the altitude increases by 304.8 m (1.8°F/1000 ft) when the altitude is higher than 900 m (2952.76 ft). Do not allow exposure to direct sunlight.

Other related questions:
Difference between the RH5885 V2, RH5885 V3, and RH5885H V3
Visit http://support.huawei.com/huaweiconnect/enterprise/thread-230857.html.

Differences between the 4-socket RH5885 V2 and 8-socket RH5885 V2
An 8-socket RH5885 V2 server is made up of two 4-socket RH5885 V2 servers connected through four QPI cables. One of the 4-socket RH5885 V2 servers serves as the master node and the other as the slave node. Hardware differences: ? Rear I/O module: For the 4-socket server, the rear I/O module can be configured with two hard disks and the QPI cables cannot be connected. For the 8-socket server, the rear I/O module cannot be configured with two hard disks and the QPI cables are required. ? Hard disk quantity: 10 (4-socket server); 16 (8-socket server) ? CPU configuration: The 8-socket server must be configured with all CPUs and the 4-socket server can be configured with two or four CPUs. ? DIMM configuration: For the 4-socket server, DIMMs must be symmetrically installed on the memory risers. For the 8-socket server, apart from the symmetry requirements, the DIMMs must be installed on two nodes and the DIMM configuration must be the same on the two memory risers. ? RAID configuration: The 8-socket server requires only one RAID controller card, which must be installed on the master node. Software differences: ? The slave node of the 8-socket server has no BIOS. Therefore, no BIOS information is displayed on iMana. ? The power button on the front panel of the slave node of the 8-socket server is available, but there is no related power control page on the iMana WebUI. ? The iMana of the slave node of the 8-socket server does not provide black box, power-on strategy, system start strategy, and serial port switchover functions.

Whether an RH5885 V2 8-socket server can be divided into two 4-socket servers
In principle, an RH5885 V2 8-socket server is not allowed to be divided into two 4-socket servers unless the customer requests it. If it is divided and a CPU error occurs on one server, the CPU error will also be reported on the other server. In this case, you need to use the BMC for 4-socket servers instead.

Whether two RH5885 V2 4-socket servers can be combined into one 8-socket server
Two RH5885 V2 4-socket servers cannot be combined into one 8-socket server. To upgrade a 4-socket server to an 8-socket server, you need to use the BMC for 8-socket servers and upgrade the BIOS version to a version for 8-socket servers.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top