RH5885 V2 overview

0

The Huawei RH5885 V2 server is a 4U 8-socket high-performance computing server designed for Internet, Internet data centers (IDCs), cloud computing, enterprise, and telecom service applications. It applies to high-performance computing, databases, web servers, virtualization, basic enterprise applications, and telecom services.

An 8-socket RH5885 V2 system consists of two nodes: master node and slave node. The two nodes are connected by four QPI cables and run together as a server.

Other related questions:
Difference between the RH5885 V2, RH5885 V3, and RH5885H V3
Visit http://support.huawei.com/huaweiconnect/enterprise/thread-230857.html.

Differences between the 4-socket RH5885 V2 and 8-socket RH5885 V2
An 8-socket RH5885 V2 server is made up of two 4-socket RH5885 V2 servers connected through four QPI cables. One of the 4-socket RH5885 V2 servers serves as the master node and the other as the slave node. Hardware differences: ? Rear I/O module: For the 4-socket server, the rear I/O module can be configured with two hard disks and the QPI cables cannot be connected. For the 8-socket server, the rear I/O module cannot be configured with two hard disks and the QPI cables are required. ? Hard disk quantity: 10 (4-socket server); 16 (8-socket server) ? CPU configuration: The 8-socket server must be configured with all CPUs and the 4-socket server can be configured with two or four CPUs. ? DIMM configuration: For the 4-socket server, DIMMs must be symmetrically installed on the memory risers. For the 8-socket server, apart from the symmetry requirements, the DIMMs must be installed on two nodes and the DIMM configuration must be the same on the two memory risers. ? RAID configuration: The 8-socket server requires only one RAID controller card, which must be installed on the master node. Software differences: ? The slave node of the 8-socket server has no BIOS. Therefore, no BIOS information is displayed on iMana. ? The power button on the front panel of the slave node of the 8-socket server is available, but there is no related power control page on the iMana WebUI. ? The iMana of the slave node of the 8-socket server does not provide black box, power-on strategy, system start strategy, and serial port switchover functions.

Whether an RH5885 V2 8-socket server can be divided into two 4-socket servers
In principle, an RH5885 V2 8-socket server is not allowed to be divided into two 4-socket servers unless the customer requests it. If it is divided and a CPU error occurs on one server, the CPU error will also be reported on the other server. In this case, you need to use the BMC for 4-socket servers instead.

What is the positioning of the TE20?
The TE20 is an HD videoconferencing endpoint innovated by Huawei for small and medium conference rooms. It is highly cost-effective and easy-to-use. The TE10 supports a video resolution of up to 1080p 30 fps or 720p 60 fps. It has a sleek and compact design, making it portal and easy to install. The TE20 has three models: TE20 (5X), TE20 (5X-NoWIFI), and TE20 (12X).

S1720 overview
Introduction to S1720: The S1720 series switches are next-generation energy-saving gigabit Layer 2 Ethernet switches that support configuration of up to eight VLANIF interfaces. The series switches are equipped with console ports and can be managed and maintained using SNMP, command line interface (CLI), web-based network management system, Telnet, or Secure Shell (SSH) V2.0.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top