Is the static route affected if the BFD for the static route is in AdminDown state


The static route is not affected. The static route is invalid only when the BFD detects a link fault.

Other related questions:
Configure a static route on the S1700
Configure a static or default route on the S1700 as follows: 1. Choose IP Routing > IPv4 Route from the navigation tree on the left. 2. Select IPv4 Static/Default Route and click New. 3. Configure parameters such as the IP address, subnet mask, and gateway address, and the click Apply. Note: Only S1720, S1700-FR, and S1700-GFR switches support the routing feature.

Static routes on the S1700
The following S1700 switch models do not support static routes: �?NMS-free switches �?Web-managed switches (S1728GWR-4P switches): do not support the routing feature The SNMP-based switches (S1720, S1700-FR, and S1700-GFR switches) support IPv4 and IPv6 static routing.

Configuring static routes
Configure static routes on an AC when one of the following conditions is met: - The AC is connected in bypass mode and needs to communicate with devices on different network - segments and APs. - The AC functions as a gateway for Internet access. - The AC functions a Layer 3 device on the intranet and needs to communicate with other Layer 3 devices. Configure static routes as follows: [HUAWEI] ip route-static //Configure a default route. [HUAWEI] ip route-static //Configure a specific route.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top