RH5885H V3 PSUs

1

The RH5885H V3 supports two PSUs in 1+1 redundancy mode or four PSUs in 2+2 redundancy mode. The rated input voltage is as follows:

Two PSUs:
? 2500 W AC PSU: 2500 W (input: -48 V DC to -60 V DC)
? 2000 W AC PSU:
 800 W (input: 90 V AC to  143 V AC)
 1800 W (input: 180 V AC to 242 V AC)
 2000 W (input: 198 V AC to 264 V AC)
 2000 W (input: 192 V DC to 288 V DC)
? 3000 W AC PSU:
 1200 W (input: 90 V AC to  143 V AC)
 2500 W (input: 180 V AC to 242 V AC)
 3000 W (input: 198 V AC to 264 V AC)
 3000 W (input: 192 V DC to 288 V DC)

Four PSUs:
? 800 WAC PSU:
600 W (input: 90 V AC to 130 V AC�?BR>800 W (input: 180 V AC to 264 V AC)
800W (input: 192 V DC to 288 V DC)

Other related questions:
Difference between the RH5885 V2, RH5885 V3, and RH5885H V3
Visit http://support.huawei.com/huaweiconnect/enterprise/thread-230857.html.

What's function of PSUs components of the RH1288 V3
The RH1288 V3 uses two AC or DC hot-swappable PSUs in 1+1 redundancy mode based on the input power: AC PSUs: 100 V to 240 V AC DC PSUs: �?8 V to �?0 V DC 240 V high voltage direct current (HVDC) PSUs: 240 V DC 380 V HVDC PSUs: 260 V to 400 V DC NOTICE: The PSUs support double-pole/neutral fusing.

Whether the RH5885H V3 can be upgraded from 4-socket to 8-socket
The RH5885 V3 and RH5885H V3 cannot be upgraded from a 4-socket to an 8-socket configuration. You can purchase 8-socket RH8100 V3 servers and use them to substitute for RH5885 V3 and RH5885H V3 servers.

What modules could Tecal Nagios plug-in managed for RH2288H V3 and RH5885H V3?
In addition to PSU, fan module, and RAID controller alarms, RH2288H V3 and RH5885H V3 can report temperature, Watchdog, sub management system, hard disk, and memory alarms.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top