RH5885H V3 acoustic noise

3

The data listed in the following is the declared A-weighted sound power levels (LWAd) and declared average bystander position A-weighted sound pressure levels (LpAm) when the server is operating in a 23°C (73.4°F) ambient environment. Noise emissions are measured in accordance with ISO 7999 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
? Idle:
LWAd: 7.1 Bels
LpAm: 58.8 dBA
? Operating:
LWAd: 7.1 Bels
LpAm: 58.8 dBA
Note:
The actual sound levels generated during server operating vary depending on the server configuration, load, and ambient temperature.

Other related questions:
Difference between the RH5885 V2, RH5885 V3, and RH5885H V3
Visit http://support.huawei.com/huaweiconnect/enterprise/thread-230857.html.

Whether the RH5885H V3 can be upgraded from 4-socket to 8-socket
The RH5885 V3 and RH5885H V3 cannot be upgraded from a 4-socket to an 8-socket configuration. You can purchase 8-socket RH8100 V3 servers and use them to substitute for RH5885 V3 and RH5885H V3 servers.

What modules could Tecal Nagios plug-in managed for RH2288H V3 and RH5885H V3?
In addition to PSU, fan module, and RAID controller alarms, RH2288H V3 and RH5885H V3 can report temperature, Watchdog, sub management system, hard disk, and memory alarms.

RH5885 V3 support for 32-bit OSs
The RH5885 V3 and RH5885H V3 support only 64-bit OSs.

Whether the fan noise of the USG6330 can be reduced
You can run the test fan-speed fan-id fan-speed command to adjust the fan speed of the USG6330. Manual adjustment is not recommended.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top