Support of BGP on the AR

2

The support of BGP by AR models of V200R008 is different.
Except for the AR509CG-Lt, AR509CG-Lc AR550C-2C6GE, and AR500 series, all other AR models support BGP.

The support of BGP4+ by AR models of V200R008 is different.
Except for the AR511GW-LAV2M3, AR511GW-LM7, and AR511GW-L-B3, all other AR models support BGP4+.

Other related questions:
How to configure a route through the web NMS on an AR router
To configure a static route, do as follows: 1. Choose IP Service > Route > Static Route Configuration. . 2. Click Create in the IPv4 Static Route Configuration Table or IPv6 Static Route Configuration Table according to requirements to enter the parameter configuration page. 3. Configure parameters one by one, and click OK to complete the configuration. To configure a dynamic route, do as follows: - Configure the OSPF function. 1. Choose IP Service > Route > Dynamic Route Configuration > OSPF to enter the OSPF List page. 2. Click Create, enter parameters, and click ok to create an OSPF process. 3. On the OSPF List page, select the new OSPF process, click Advanced at the right side, click the Basic or Advanced tab page, and modify the OSPF process parameters according to requirements. - Configure the BGP function. 1. Choose IP Service > Route > Dynamic Route Configuration > BGP, configure parameters, and click Apply. 2. On the Peer Configuration List page, click Create, enter parameters, and click ok to create a BGP neighbor.

Does an S series switch support BGP
BGP support varies depending on S series switches, which is listed as follows (until V200R008): - S7700/S9700/S12700: supported - S9300: supported - S6720EI: supported - S6700EI: supported - S5720HI: supported - S5710HI: supported - S5700HI: supported - S5720EI: supported - S5710EI: supported - S5700EI: supported - S5720SI/S5720S-SI: supported - S5700SI: not supported - S5710LI: not supported - S5700LI: not supported - S5700S-LI: not supported - S3700HI: supported - S3700EI: supported - S3700SI: not supported - S2750EI: not supported - S2720EI: not supported - S2700EI: not supported - S2710SI: not supported - S2700SI: not supported - S1720: not supported BGP4+ support varies depending on S series switches, which is listed as follows (until V200R008): - S7700/S9700/S12700: supported - S9300: supported - S6720EI: supported - S6700EI: supported (V200R001 and later) - S5720HI: supported - S5710HI: supported - S5700HI: supported (V200R001 and later) - S5720EI: supported - S5710EI: supported - S5700EI: supported (V200R001 and later) - S5720SI/S5720S-SI: supported - S5700SI: not supported - S5710LI: not supported - S5700LI: not supported - S5700S-LI: not supported - S3700HI: supported (V200R001 and later) - S3700EI: not supported - S3700SI: not supported - S2750EI: not supported - S2720EI: not supported - S2700EI: not supported - S2710SI: not supported - S2700SI: not supported - S1720: not supported

Which networking features does an MPLS BGP VPN support
When the switch functions as a PE, you can configure the static routing, RIPv1, RIPv2, OSPF, EBGP, and IS-IS multi-instances between the PE and the CE. The switch supports such networking modes as intranet, extranet, Hub&Spoke, CE dual-homing, and hierarchical MPLS BGP VPN.

Configuring the BGP priority on the firewall
The method for modifying the BGP priority on the USG2000&5000&6000 is as follows: -Modifying the BGP priority: [USG]bgp 25212 [USG-bgp]ipv4-family unicast [USG-bgp-af-ipv4]preference 120

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top