RH2288 V2 acoustic noise

0

The data listed in the following is the declared A-weighted sound power levels (LWAd) and declared average bystander position A-weighted sound pressure levels (LpAm) when the server is operating in a 23°C (73.4°F) ambient environment. Noise emissions are measured in accordance with ISO 7999 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
? Idle:
LWAd: 6.2 Bels
LpAm: 44.8 dBA
? Operating:
LWAd: 6.7 Bels
LpAm: 51.8 dBA

Note:
The actual sound levels generated during server operating vary depending on the server configuration, load, and ambient temperature.

Other related questions:
Differences between the RH2288 V2 and RH2288 V3
The RH2288 V3/RH2288H V3 is different from the RH2288 V2 in the following aspects: ? Powerful performance: The RH2288 V3/RH2288H V3 uses the latest Intel? Xeon? E5-2600 v3 series processors, with up to 18 cores per processor. ? Easy management: The RH2288 V3/RH2288H V3 uses the new-generation iBMC management system for more secure and convenient management. ? Easy troubleshooting: The RH2288 V3/RH2288H V3 provides a fault diagnosis LED to display fault codes upon detecting faults. For other differences, see the server user guide.

Differences between the RH2288 V2, RH2288H V2, and RH2288E
The four NICs of the RH2288 V2 are GE NICs on the mainboard while the NICs of the RH2288H V2 are flexible NICs. The number of PCIe slots on riser cards is also different. The RH2288E V2 supports holding guide rails for installation. For details, see their respective user guide.

Server memory configuration assistant
Huawei Server DIMM Configuration Assistant helps you rapidly determine the DIMM installation sequence based on the server model and number of CPUs and DIMMS configured in the server. You can obtain this tool at: DIMM Configuration Assistant

UID indicator function
The Unit Identification (UID) indicator helps locate a server node in a chassis. You can use the iMana WebUI or manually press the UID indicator to turn the indicator on or off. -Steady blue: The server is being located. -Off: The server is not being located. You can press and hold down this button for 6 seconds to reset the iMana.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top