RH2288 V2 CPUs

6

The RH2288 V2 supports a maximum of two Intel?Xeon? E5-2600 (Sandy Bridge-EP) or E5-2600 v2 (Ivy Bridge-EP) processors. The two CPUs are connected through two QuickPath buses of full bandwidth. Each link provides a unidirectional transmission rate of up to 8.0 GT/s.
E5-2600 (Sandy Bridge-EP) series CPU specifications:
? One or two CPUs of four, six, or eight cores
? Highest CPU frequency: 3.3 GHz
? Maximum power consumption of each CPU: 135 W
? Maximum L3 cache of each CPU: 20 MB


E5-2600 v2 (Ivy Bridge-EP) series CPU specifications:
? One or two CPUs of 4/6/8/10/12 cores
? Highest CPU frequency: 3.5 GHz
? Maximum power consumption of each CPU: 130 W
? Maximum L3 cache of each CPU: 30 MB

For details, see the Huawei Server Compatibility Checker at http://support.huawei.com/onlinetoolsweb/ftca/en.

Other related questions:
Differences between the RH2288 V2 and RH2288 V3
The RH2288 V3/RH2288H V3 is different from the RH2288 V2 in the following aspects: ? Powerful performance: The RH2288 V3/RH2288H V3 uses the latest Intel? Xeon? E5-2600 v3 series processors, with up to 18 cores per processor. ? Easy management: The RH2288 V3/RH2288H V3 uses the new-generation iBMC management system for more secure and convenient management. ? Easy troubleshooting: The RH2288 V3/RH2288H V3 provides a fault diagnosis LED to display fault codes upon detecting faults. For other differences, see the server user guide.

Differences between the RH2288 V2, RH2288H V2, and RH2288E
The four NICs of the RH2288 V2 are GE NICs on the mainboard while the NICs of the RH2288H V2 are flexible NICs. The number of PCIe slots on riser cards is also different. The RH2288E V2 supports holding guide rails for installation. For details, see their respective user guide.

Server memory configuration assistant
Huawei Server DIMM Configuration Assistant helps you rapidly determine the DIMM installation sequence based on the server model and number of CPUs and DIMMS configured in the server. You can obtain this tool at: DIMM Configuration Assistant

UID indicator function
The Unit Identification (UID) indicator helps locate a server node in a chassis. You can use the iMana WebUI or manually press the UID indicator to turn the indicator on or off. -Steady blue: The server is being located. -Off: The server is not being located. You can press and hold down this button for 6 seconds to reset the iMana.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top