RH2288H V3 PSUs

2

The RH2288H V3 uses two hot-swappable PSUs working in 1+1 redundancy mode. The rated power of the PSUs is as follows:
? 460 W AC  Platinum PSU, supporting 240 V HVDC
? 750 W AC Platinum PSU, supporting 240 V HVDC
? 750 W AC Titanium PSU
? 1200 W AC Platinum PSU, supporting 240 V HVDC
? 1200 W 380 V HVDC
? 800 W -48V or -60V HVDC

Note: 
All the PSUs support double-pole/neutral fusing.

Other related questions:
What's function of PSUs components of the RH1288 V3
The RH1288 V3 uses two AC or DC hot-swappable PSUs in 1+1 redundancy mode based on the input power: AC PSUs: 100 V to 240 V AC DC PSUs: �?8 V to �?0 V DC 240 V high voltage direct current (HVDC) PSUs: 240 V DC 380 V HVDC PSUs: 260 V to 400 V DC NOTICE: The PSUs support double-pole/neutral fusing.

What modules could Tecal Nagios plug-in managed for RH2288H V3 and RH5885H V3?
In addition to PSU, fan module, and RAID controller alarms, RH2288H V3 and RH5885H V3 can report temperature, Watchdog, sub management system, hard disk, and memory alarms.

RH2288 V3 health indicator
RH1288 V3, RH2288 V3, RH2288H V3 health indicator status description: ? Steady green: The server is operating properly. ? Blinking red at 1 Hz: A major alarm is generated. ? Blinking red at 5 Hz: A critical alarm is generated.

Entering the RAID configuration interface
If the server is configured with an LSI 1078, 2208, or 3108 RAID card, press Ctrl+H during the server startup process. If the server is configured with an LSI 1064, 1068, 2308, or 3008 RAID card, press Ctrl+C during the server startup process. If the server is configured with SoftRAID, press Ctrl+M after the hard disk self-test during the server startup process.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top