RH2288H V3 acoustic noise

0

The data listed in the following is the declared A-weighted sound power levels (LWAd) and declared average bystander position A-weighted sound pressure levels (LpAm) when the server is operating in a 23°C (73.4°F) ambient environment. Noise emissions are measured in accordance with ISO 7999 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
? Idle:
LWAd: 5.1 Bels
LpAm: 35.1 dBA
? Operating:
LWAd: 6.1 Bels
LpAm: 45.1 dBA

Note:
The actual sound levels generated during server operating vary depending on the server configuration, load, and ambient temperature.

Other related questions:
What modules could Tecal Nagios plug-in managed for RH2288H V3 and RH5885H V3?
In addition to PSU, fan module, and RAID controller alarms, RH2288H V3 and RH5885H V3 can report temperature, Watchdog, sub management system, hard disk, and memory alarms.

RH2288 V3 health indicator
RH1288 V3, RH2288 V3, RH2288H V3 health indicator status description: ? Steady green: The server is operating properly. ? Blinking red at 1 Hz: A major alarm is generated. ? Blinking red at 5 Hz: A critical alarm is generated.

Entering the RAID configuration interface
If the server is configured with an LSI 1078, 2208, or 3108 RAID card, press Ctrl+H during the server startup process. If the server is configured with an LSI 1064, 1068, 2308, or 3008 RAID card, press Ctrl+C during the server startup process. If the server is configured with SoftRAID, press Ctrl+M after the hard disk self-test during the server startup process.

RH2288H V2 health indicator
V2 rack server health indicator status description: ? Steady green: The server is operating properly. ? Blinking red at 2 Hz: A major alarm is generated. ? Blinking red at 4 Hz: A critical alarm is generated.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top