RH2288H V2 overview


The RH2288H V2 (RH2288H V2 for short) is a generic 2U dual-socket rack server launched by Huawei to meet customer requirements for the Internet, Internet data center (IDC), cloud computing, enterprise market applications, and telecom service applications.
The RH2288H V2 supports high performance computing (HPC), databases, virtualization, basic enterprise applications, and telecommunication service applications thanks to its outstanding computing performance, large storage capacity, low energy consumption, high reliability, and ease of deployment and management.
The RH2288H V2 has three models:
? RH2288H V2 (8 hard disks)
Eight 2.5-inch SAS HDDs, SATA HDDs, or SSDs
? RH2288H V2 (14 hard disks)
Twelve 3.5-inch SAS or SATA HDDs at the front and two 2.5-inch SAS, SATA HDDs, or SSDs at the rear
You can install a customized 3.5-inch hard disk tray to support twelve 2.5-inch hard disk at the front.
? RH2288H V2 (26 hard disks)
Twenty-four 2.5-inch SAS HDDs, SATA HDDs, or SSDs at the front and two 2.5-inch SAS, SATA HDDs, or SSDs at the rear

Other related questions:
Differences between the RH2288 V2, RH2288H V2, and RH2288E
The four NICs of the RH2288 V2 are GE NICs on the mainboard while the NICs of the RH2288H V2 are flexible NICs. The number of PCIe slots on riser cards is also different. The RH2288E V2 supports holding guide rails for installation. For details, see their respective user guide.

RH2288H V2 health indicator
V2 rack server health indicator status description: ? Steady green: The server is operating properly. ? Blinking red at 2 Hz: A major alarm is generated. ? Blinking red at 4 Hz: A critical alarm is generated.

Installing OS on a server
Use the Huawei Server Compatibility Checker (http://support.huawei.com/onlinetoolsweb/ftca/en) to check the OS supported by the server. For details about the OS installation methods (using ServiceCD, DVD-ROM drive, image, and PXE), see OS Installation Guide. For details about the OS installation cases (including centOS, Citrix, Debian, Fedora, FreeBSD, Kylin, Oracle Linux, RedFlag, RedHat, Rocky, Solaris, SUSE, Ubuntu, VMware ESXi, and Windows), see http://support.huawei.com/huaweiconnect/enterprise/thread-286397.html.

Default BMC IP address, user name, and password of a rack server
The default IP address and subnet mask of the BMC (iBMC or iMana) for rack servers are as follows: Default IP address: Default subnet mask: The default user name and password of the BMC (iBMC/iMana) are as follows: Default user name: root Default password: Huawei12#$ The default password of iMana for some live network products of earlier versions may be root.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top