RH2285H V2 NIC

4

Four types of NIC mezzanine cards are supported, which provide the following network ports:
? Two GE electrical ports, supporting NC-SI, WOL, and PXE
? Four GE electrical ports, supporting NC-SI, WOL, and PXE
? Two 10GE optical ports, supporting NC-SI and PXE
? Two 10GE electrical ports, supporting NC-SI, WOL, and PXE

In addition, you can use PCIe slots to install various network adapters that provide different types and quantities of network ports.
For details about the compatibility with network adapters, see the compatibility list: http://support.huawei.com/onlinetoolsweb/ftca/en

Other related questions:
Bonding of the server NIC
For details about the NIC bonding operations, see "NIC Bonding" in Service Maintenance Manual.

Server black box
The black box consists of a built-in memory chip and fault monitoring software. The memory chip, independent from the server hard disks, stores fault information. The fault monitoring software records the kernel information when the server OS breaks down. For detailed information about the black box, see the iMana User Guide for your server model.

RH2288H V2 health indicator
V2 rack server health indicator status description: ? Steady green: The server is operating properly. ? Blinking red at 2 Hz: A major alarm is generated. ? Blinking red at 4 Hz: A critical alarm is generated.

Whether 10GE NICs support a GE rate
The 10GE NIC can support a GE rate but to do so, you need to replace the 10GE optical modules with GE optical modules.

Differences between the RH2288 V2, RH2288H V2, and RH2288E
The four NICs of the RH2288 V2 are GE NICs on the mainboard while the NICs of the RH2288H V2 are flexible NICs. The number of PCIe slots on riser cards is also different. The RH2288E V2 supports holding guide rails for installation. For details, see their respective user guide.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top