RH1288 V2 expansion slot

1

The RH1288 V2 supports a maximum of three PCIe cards:
? One full-height half-length PCIe card
? One half-height half-length PCIe card
? One RAID controller card installed in a non-standard slot
The PCIe slots support Huawei PCIe iNIC, which improves the I/O bandwidth and throughput.
One Huawei SSD card, which greatly improves I/O performance for search, cache, and download services
One Quadro 2000 GPU

For details about the PCIe cards supported by the RH1288 V2, see the compatibility list:
http://support.huawei.com/onlinetoolsweb/ftca/en

Other related questions:
Differences among RH1288A V2, RH1288 V2, and RH1288 V3
The differences among the RH1288A V2, RH1288 V2, and RH1288 V3 are listed as follows. The servers' specifications are subject to the official website. ? The RH1288A V2 adopts the Huawei Hi1710 management chip (iBMC), and supports Intel? Xeon? E5-2600 v2 series processors, eight DIMM slots, and two LOM GE electrical ports. ? The RH1288 V2 adopts the management software iMana, and supports Intel? Xeon? E5-2600 and E5-2600 v2 series processors, 24 DIMM slots, and GE or 10GE LOM NIC modules. ? RH1288 V3 adopts the Huawei Hi1710 management chip (iBMC), and supports Intel? Xeon? E5-2600 v3 series processors, 16 DIMM slots, and GE or 10GE LOM NIC modules.

Server memory configuration assistant
Huawei Server DIMM Configuration Assistant helps you rapidly determine the DIMM installation sequence based on the server model and number of CPUs and DIMMS configured in the server. You can obtain this tool at: DIMM Configuration Assistant

Which is PCIe slots provided by different PCIe riser module in RH1288 V3
PCIe riser module 1 provides slot 1, and PCIe riser module 2 provides slot 2. NOTE: The PCIe slots mapping to a vacant CPU socket are unavailable. The following describes the mapping between PCIe slots and CPUs, and the PCIe specifications of the RH1288 V3. PCIe Slot CPU PCIe Standard Connector Bandwidth Bus Width Slot1 CPU1 PCIe 3.0 x16 x16 Slot2 CPU2 PCIe 3.0 x16 x16

How many expansion slots does a file engine node have and where are they?
A file engine node offers four expansion slots for an Ethernet adapter with four 1 Gbit/s network ports, a 10 Gbit/s Ethernet adapter with two 10 Gbit/s network ports. A1, A2, A3, and A4 (B1, B2, B3, and B4) on the slot area of the rear panel of the file engine stand for expansion slots.

Querying the server RAID controller card model
Log in to iMana and query the board ID. Then, find the RAID controller model based on the board ID at http: //support.huawei.com/ecommunity/bbs/10239808.html

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top