Do interfaces conflict when the NAT server and outbound NAT are configured on the AR router

25

Interfaces do not conflict when the NAT server and outbound NAT are configured on the AR router.

Other related questions:
Does the AR router NAT Server and NAT Outbound have port conflicts?
No, AR router NAT Server and NAT Outbound does not exist port conflict.

When prompted to configure NAT Server,AR router report ARP conflict or interface conflict ?
When configure NAT Server, if use the network interface IP address, there may be the following configuration error. [AR2200-GigabitEthernet0/0/1] IP 22.1.1.1 address 24 [AR2200-GigabitEthernet0/0/1] NAT protocol 80 global inside 22.1.1.1 10.1.1.1 server Error: The conflicts with or ARP interface address IP. At this time, need to configure NAT server command when the network port IP address to current-interface, as follows: [AR2200-GigabitEthernet0/0/1] NAT protocol 80 global inside current-interface 10.1.1.1 server

Can outbound NAT and NAT server be configured simultaneously on an AR
On an AR router, outbound NAT and NAT server can be configured simultaneously on an interface. For detailed configurations, see "Internet Access > NAT > Example for Configuring NAT to Enable Users to Access the Internet and Provide the WWW Service Externally" in the Typical Configuration Examples.

A message about interface conflict or ARP IP address conflict is displayed when a NAT server is configured
When the IP address of an interface on the public network is used in the nat server command to configure an intranet server to provide services for users on the public network, the following error message is displayed: [AR2200-GigabitEthernet0/0/1] ip address 22.1.1.1 24 [AR2200-GigabitEthernet0/0/1] nat server protocol 80 global 22.1.1.1 inside 10.1.1.1 Error: The address conflicts with interface or ARP IP. To solve this problem, change the public IP address to the current-interface in the nat server command as follows: [AR2200-GigabitEthernet0/0/1] nat server protocol 80 global current-interface inside 10.1.1.1

What is the difference between the Static NAT and NAT Server on AR router?
The difference between NAT Server and NAT Static configuration is: NAT Server to access the Internet from intranet, only do address replace, but NAT Static for network address; active access outside the network will also replace the address and port number.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top