X8000 V2 introduction

3

Huawei FusionServer X8000 V2 is a cabinet-level server that Huawei developed for the Scorpio 2.0 project. Featuring high density, large capacity, energy efficiency, and fast deployment, the X8000 V2 is ideal for Internet data center applications.

Other related questions:
Default IP address, user name, and password of the X8000 BMC
The X8000 server nodes do not have a default iMana (BMC) IP address. Therefore, it is recommended that the RMC be used to implement centralized management. When using an X8000 server node for the first time, query the iMana management port IP address of the node on the RMC. You can log in to the RMC command line interface using Telnet or SSH, and run the following command to query the iMana management network port IP address, DHCP/static mode, and gateway IP address: rmcget -l blade_id -t eth0 -d info In this command: id indicates the serial number of the server node. The value range is 01a to 40a and 01b to 40b. eth0 indicates the iMana management network port. The default iMana user name and password are as follows: Default user name: root Default password: Huawei12#$

Default IP address, user name, and password of the X8000 RMC
The default IP address and subnet mask of the X8000 rack management controller (RMC) are as follows: Default IP address: 192.168.2.100 Default subnet mask: 255.255.255.0 Default RMC user name and password are as follows: Default user name: root Default password: Huawei12#$

Differences between the RH2288 V2, RH2288H V2, and RH2288E
The four NICs of the RH2288 V2 are GE NICs on the mainboard while the NICs of the RH2288H V2 are flexible NICs. The number of PCIe slots on riser cards is also different. The RH2288E V2 supports holding guide rails for installation. For details, see their respective user guide.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top