DH628 V2 introduction

1

The DH628 V2 is a two-socket server node of the Huawei X8000 high-density server. It uses Intel? Xeon? E5-2400/E5-2400 v2 series processors, and supports a maximum of eight DDR3 DIMMs and 12 x 2.5-inch or 3.5-inch hard disks and two 2.5-inch hard disks. The DH628 V2 applies to large-capacity and distributed storage application scenarios.

Other related questions:
Default IP address, user name, and password of the X8000 BMC
The X8000 server nodes do not have a default iMana (BMC) IP address. Therefore, it is recommended that the RMC be used to implement centralized management. When using an X8000 server node for the first time, query the iMana management port IP address of the node on the RMC. You can log in to the RMC command line interface using Telnet or SSH, and run the following command to query the iMana management network port IP address, DHCP/static mode, and gateway IP address: rmcget -l blade_id -t eth0 -d info In this command: id indicates the serial number of the server node. The value range is 01a to 40a and 01b to 40b. eth0 indicates the iMana management network port. The default iMana user name and password are as follows: Default user name: root Default password: Huawei12#$

Differences between the RH2288 V2, RH2288H V2, and RH2288E
The four NICs of the RH2288 V2 are GE NICs on the mainboard while the NICs of the RH2288H V2 are flexible NICs. The number of PCIe slots on riser cards is also different. The RH2288E V2 supports holding guide rails for installation. For details, see their respective user guide.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top