Number of concurrent connections of the MM910

AR510: 16 AR120/AR150/AR200/AR1200/AR220X: 256 AR2200: 512 SRU40: 1024 SRU80: 2048 SRU100/SRU200/SRU400/MRU40/MRU80: 4096 The NAT server and static NAT share resources. Note: These figures also indicate the maximum number of NAT server and static NAT configurations supported by an AR router

The USG2000&5000 series devices support configuring the number of global connections through the CLI. For details, see USG2000&5000 Product Document > CLI Configuration Guide > Firewall > Traffic Limiting Policies Configuration.

Configuring the maximum number of concurrent SSL VPN users on the USG v-gateway cur-max-user The v-gateway cur-max-user command modifies the maximum number of concurrent users supported by a virtual gateway. By default, the maximum number of concurrent users is the number of concurrent users available as specified by the system license. The undo v-gateway cur-max-user command restores the maximum number of concurrent users to the default value. Syntax v-gateway v-gateway-name cur-max-user cur-max-user undo v-gateway v-gateway-name cur-max-user Parameter Description v-gateway-name Virtual gateway name cur-max-user cur-max-user Maximum number of concurrent users supported by a virtual gateway Usage Guide The maximum number of concurrent users supported by the USG is controlled by the license. The license also limits the total number of concurrent users on virtual gateways of the USG. The maximum number of concurrent users on virtual gateways should be smaller than that of users on virtual gateways. By default, the maximum number of concurrent users on virtual gateways falls into the following situations: If a concurrent user limit is set for virtual gateways, the maximum number of concurrent users on the new virtual gateway is the number of remaining concurrent users of the system license. If no concurrent user limit is set for virtual gateways, the maximum number of concurrent users on the new virtual gateway is the number of concurrent users allowed by the system license. Example system-view [sysname] v-gateway abc cur-max-user 20 //Set the maximum number of concurrent users on virtual gateway abc to 20.

The WebUI of server iBMC or iMana supports a maximum of four concurrent logins. The CLI supports a maximum of five concurrent logins.

If the E9000 is configured with two management modules and the two management modules work in active/standby mode, you need to connect to the active management module to implement management. You can determine the active/standby status of management modules by using the ACT indicators. If the ACT indicator of a management module is steady green, the management module is the active one. If the ACT indicator of a management module is off, the management module is the standby one.