E9000 connection by using SOL


The E9000 server can connect to compute nodes and switch modules in the chassis by using the SOL function provided by the MM910, facilitating remote maintenance. For details, visit the following link:

Other related questions:
Remote KVM connection of the E9000
The E9000 supports the remote connection to the virtual KVM of each compute node through the WebUI of the MM910. For details, visit the following link: http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900001.html

Connecting the ground cable to an E9000
When using DC power supplies, the E9000 must be grounded. Ground cables will be delivered with the E9000 servers. When using AC power supplies, the E9000 need not be grounded. No ground cables will be delivered with the E9000 server. For details about how to install the power cables and ground cables, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/chassis_inst/it_osca_chassis_120004.html.

Which management module is the E9000 connected to for management?
If the E9000 is configured with two management modules and the two management modules work in active/standby mode, you need to connect to the active management module to implement management. You can determine the active/standby status of management modules by using the ACT indicators. If the ACT indicator of a management module is steady green, the management module is the active one. If the ACT indicator of a management module is off, the management module is the standby one.

Number of concurrent connections of the MM910
A maximum of 30 users can log in to the E9000 MM910 WebUI at the same time. There is no limit on the number of concurrent login users on the CLI.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top