E9000 switch module

2

The E9000 chassis provides four (two pairs of) slots for switch modules that support Ethernet, FC, FCoE, and IB protocols and provide pass-through I/O ports. The slots are numbered as 1E, 2X, 3X, and 4E.
The E9000 supports the CX11x, CX31x, and CX91x series switch modules. For details about the switch modules, enter a specific switch module model, for example, CX911.

Other related questions:
E9000 switch module configuration assistant
Go to Link.

E9000 switch module working mode
When connecting the CX311 or CX911 switch modules of E9000 servers with FC switches through FC ports, you must change the working mode of the switch modules. The CX311 FCoE gateway and CX911 FC switching plane provide two working modes: Full Fabric (default mode) and Transparent (TR). You must set the working mode based on the connected devices. For details about the specific configuration, query with the keyword "CX311 working mode" or "CX911 working mode".

Compatibility between E9000 switch modules and subcards of blades
For details about the mapping between the E9000 switch modules and the mezzanine cards of the blades, see http://support.huawei.com/huaweiconnect/enterprise/thread-268293.html.

Whether switch modules used on the E9000 support NAT
The switch modules used on the E9000 do not support the NAT function.

MZ110
MZ110 is a 4-port GE mezzanine card applicable to CX110, CX111, and CX116.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top