E9000 power consumption

For transport devices, the heat consumption and power consumption are similar and can be considered the same. Heat consumption is expressed in BTU/h, while power consumption is expressed in W. The conversion between the two units is as follows: 1 BTU/h = 0.2931 W.

Power on an E9000 server as follows: ? If the E9000 chassis is not powered on, connect the power cables to the mains supply. The blades, switch modules, and management modules will be powered on with the chassis. ? If the chassis is powered on but the blades, switch modules, and management modules are not installed, install the modules. These modules will be automatically powered on after being installed. ? In routine maintenance, power on or off the blades or switch modules on the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html.

Power off an E9000 as follows: 1. Power off the blades or switch modules in an E9000 chassis using the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html. 2. Disconnect the E9000 power cable from the mains supply.

For details about the power consumption of OceanStor 9000, see section "Device Specifications Confirmation" in the following product documentation. You can quickly locate the section by searching for the section name. -V100R001C30: Power consumption specification -V300R005C00: Power consumption specification -V300R006C00: Power consumption specification -V300R006C10: Power consumption specification To calculate power consumption, access Storage Product Power Consumption Calculator.

VP9630 maximum power consumption: 400 W VP9650 maximum power consumption: 1100 W VP9660 maximum power consumption: 3000 W