E9000 specifications

Power on an E9000 server as follows: ? If the E9000 chassis is not powered on, connect the power cables to the mains supply. The blades, switch modules, and management modules will be powered on with the chassis. ? If the chassis is powered on but the blades, switch modules, and management modules are not installed, install the modules. These modules will be automatically powered on after being installed. ? In routine maintenance, power on or off the blades or switch modules on the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html.

For details about how to upgrade the E9000, see: http://support.huawei.com/huaweiconnect/enterprise/thread-280945.html

A converged network adapter (CNA) is a 10GE network interface card (NIC) that supports the Fibre Channel over Ethernet (FCoE) function. The MZ510 and MZ512 of E9000 servers are CANs.

The MZ510 and MZ512 support Universal Multi-Channel (UMC), that is, multi-PF. Each physical port supports multiple physical functions (PFs), which divide a port into multiple independent logical channels. For details about related applications, see the NIC user guide. For example: http://support.huawei.com/ehedex/hdx.do?docid=DOC1000053357&lang=zh&id=ZH-CN_TOPIC_0009315440

On the MM910 WebUI, you can choose Chassis Settings > Network Settings > MM to view and set network parameters such as the IP address, gateway, and DNS of the MM910. For details, visit the following link: http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900041.html