Which management module is the E6000 connected for management?

0

If the E6000 is configured with two management modules and the two management modules work in active/standby mode, you need to connect to the active management module to implement management. You can determine the active/standby status of management modules by using the ACT indicators. If the ACT indicator of a management module is steady green, the management module is the active one. If the ACT indicator of a management module is blinking, the management module is the standby one.

Other related questions:
Which management module is the E9000 connected to for management?
If the E9000 is configured with two management modules and the two management modules work in active/standby mode, you need to connect to the active management module to implement management. You can determine the active/standby status of management modules by using the ACT indicators. If the ACT indicator of a management module is steady green, the management module is the active one. If the ACT indicator of a management module is off, the management module is the standby one.

How does the E6000 telnet to a switch module by using a management module?
The E6000 cannot access a switch module in this mode because it does not have the SOL function. You can configure a switch module IP address on the management module, and then connect to the switch module network port to access the switch module by using the client.

Default IP address, user name, and password of an E6000 blade
The iMana (BMC) default user name and password of an E6000 blade are as follows: Default user name: root Default password: Huawei12#$ The default password of iMana for some live network products of earlier versions may be root. The default IP address and subnet mask of the iMana (BMC) in slots 1 to 10 are as follows: Default IP address: 10.10.1.101 to 10.10.1.110 Default subnet mask: 255.255.255.0 To log in to the BIOS of the E6000 blade, you may need to enter the default password uniBIOS123.

Default user name and password of the NX112
The default user name and password of the NX112 management network port are as follows: Default user name: root Default password: Huawei12#$

Default IP address, user name, and password of the NX120
The default IP address and subnet mask of the NX120 are as follows: Default IP address: 10.77.77.77 Default subnet mask: 255.255.255.0 The default user name and password of the NX120 management network port are as follows: The default administrator user name and password of the NX120 produced before January 1, 2014 are admin and password, respectively. The default administrator user name and password of the NX120 produced on and after January 1, 2014 are root and hwosta2.0, respectively.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top