E6000 PSUs


The E6000 is configured with six 1600 W AC PSUs or six 1300 W DC PSUs. It supports N+N or N+1 redundancy, load balancing, and fault switchover. You can determine the number of required PSUs based on the power of configured server blades.

Rated power of PSUs:
? DC PSU: 1300 W (with the input voltage of -36 V DC to -60 V DC)
? AC PSU: 900 W (with the input voltage of 100 V AC to 127 V AC)
? AC PSU: 1600 W (with the input voltage of 200 V AC to 240 V AC)

Other related questions:
E6000 upgrade
For details about how to upgrade the E6000, see: http://support.huawei.com/huaweiconnect/enterprise/thread-282467.html

What's function of PSUs components of the RH1288 V3
The RH1288 V3 uses two AC or DC hot-swappable PSUs in 1+1 redundancy mode based on the input power: AC PSUs: 100 V to 240 V AC DC PSUs: �?8 V to �?0 V DC 240 V high voltage direct current (HVDC) PSUs: 240 V DC 380 V HVDC PSUs: 260 V to 400 V DC NOTICE: The PSUs support double-pole/neutral fusing.

E6000 alarm reference
E6000 Alarm Reference: http://support.huawei.com/enterprise/en/doc/DOC1000006818/?idPath=7919749|9856522|21782478|19955021|19961378

E6000 network port mapping
The on-board NICs of an E6000 are connected to switching planes A1 and A2. The E6000 provides two mezzanine slots (MEZZ 1 and MEZZ 2) for port expansion. The card in MEZZ 1 communicates with B1 and B2 switch modules, and the card in MEZZ 2 communicates with C1 and C2 switch modules.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top