CX91x IP route configuration

2

The CX91x of the C00 version does not support L3 switching. Therefore, you cannot configure IP routes for the CX91x of the C00 version.
The CX91x of the C10 version supports L3 switching. For details about the CX91x IP route configuration (including the static route, route policy, RIP, OSPF, MCE, BGP, and ISIS configuration), see the following document.
http://support.huawei.com/enterprise/en/doc/DOC1000041694/?idPath=7919749|9856522|21782478|19955021|19961380

Other related questions:
Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Why cannot the backup information of a static route or a BGP route be generated after IP FRR is configured
IP FRR does not automatically take effect for iterated routes. Instead, an iterated route inherits the backup outbound interface and backup next hop of the route to the next hop that are generated through IP FRR. If the static route or BGP route is an iterated route and the IP FRR backup information of the next hop route is not generated, the backup information cannot be generated although the static route or BGP route matches the IP FRR policy.

Configuring static routes
Configure static routes on an AC when one of the following conditions is met: - The AC is connected in bypass mode and needs to communicate with devices on different network - segments and APs. - The AC functions as a gateway for Internet access. - The AC functions a Layer 3 device on the intranet and needs to communicate with other Layer 3 devices. Configure static routes as follows: [HUAWEI] ip route-static 0.0.0.0 0.0.0.0 172.16.0.1 //Configure a default route. [HUAWEI] ip route-static 192.168.0.0 255.255.0.0 172.16.0.1 //Configure a specific route.

Why the S series switches do not generate backup information for static routes or BGP routes after configuring IP FRRs
The iterative route does not apply the IP FRR configuration directly, but inherits next-hop route through the backup outbound interface and the backup next hop generated by IP FRR. Static route or BGP route If it is an iterative route and the next hop route does not generate backup information of IP FRR, static route or BGP route does not generate backup information even if it matches IP FRR policy.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top