CX915 indicators

0

The CX915 supports the following indicators:
? Power indicator (PWR) (this indicator applies only to the C00 version):
Off: The switch module is not powered on.
Blinking green: The switch module is being powered on.
Steady green: The switch module is operating properly.

? Stacking status indicator (SATA) (this indicator applies only to the C10 version):
Off: The switch module is not powered on.
Blinking green (the first 10 times): The switch module is being powered on.
Blinking green: The switch module is standby in stacking mode and is operating properly.
Steady green: The switch module is active in stacking mode or is not stacked, and is operating properly.

? Health status indicator (HLY):
Off: The switch module is not powered on.
Steady green: The switch module is operating properly.
Blinking red (1 Hz): A major alarm is generated.
Blinking red (4 Hz): A critical alarm is generated.
Blinking red (5 Hz): The switch module is not securely installed.

Offline button/indicator (OFL): currently invalid (reserved)

? Data transmission status indicator for the 10GE optical port:
Off: No data is being transmitted over the port.
Blinking orange: Data is being sent or received over the port.

? Connection status indicator for the 10GE optical port:
Off: The port is not connected or not properly connected.
Steady green: The port is properly connected.

? Data transmission status indicator for the 8G FC optical port (A):
Off: No data is being transmitted over the port.
Blinking orange (twice/second): A high temperature alarm has been generated if the green indicator (L) is blinking twice per second at the same time.
Blinking orange (more than twice/second): Data is being sent or received over the port.

? Connection status indicator for the 8G FC optical port (L):
Off: No optical module is installed, or an exception occurs when the port is receiving optical signals.
Steady green: The port is properly connected.
Blinking green (once/second): The device is registering or the port is in the diagnosis state.
Blinking green (twice/second): The port is not properly connected or the port is faulty. If the orange indicator (A) is blinking twice per second at the same time, a high temperature alarm has been generated.

Other related questions:
CX915 ports
The CX915 provides the following external ports: ? Two serial ports: one BMC port and one SYS port ? Twelve GE electrical ports ? Four 10GE optical ports ? Eight 8G FC optical ports The CX915 provides the following internal ports: ? Thirty-two GE ports, which are connected to half-width compute node slots 1 to 16. ? Two GE ports, which are connected to the two MM910s respectively to communicate with them. ? Twelve FCoE ports, which are connected to half-width compute node slots 1 to 12. ? Four FC ports, which are connected to half-width compute node slots 13 to 16.

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Powering off an E9000
Power off an E9000 as follows: 1. Power off the blades or switch modules in an E9000 chassis using the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html. 2. Disconnect the E9000 power cable from the mains supply.

Indication of the red alarm indicator on the Metro 1000
If the alarm indicator on the Metro 1000 is steady red, a critical alarm is generated. You need to check it on the NMS.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top