Viewing the CX915 port connection status

0

Viewing the CX915 port connection status:
For details, see Configuring the CX915 in the CX915 User Guide.
CX915 User Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000053380/?idPath=7919749|9856522|21782478|19955021|19961380
You can also refer to the deployment guide:
http://support.huawei.com/enterprise/en/doc/DOC1000038842/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Other related questions:
CX915 ports
The CX915 provides the following external ports: ? Two serial ports: one BMC port and one SYS port ? Twelve GE electrical ports ? Four 10GE optical ports ? Eight 8G FC optical ports The CX915 provides the following internal ports: ? Thirty-two GE ports, which are connected to half-width compute node slots 1 to 16. ? Two GE ports, which are connected to the two MM910s respectively to communicate with them. ? Twelve FCoE ports, which are connected to half-width compute node slots 1 to 12. ? Four FC ports, which are connected to half-width compute node slots 13 to 16.

View license status on S series switch
On an S series switch, except S1700, run the following commands to view license information: Run the display license command to view the license file information. A switch can have only one activated license file. Run this command to view detailed information about the activated license in the system, including license file name, version, validity period, and configuration. Run the display license state command to view the license status on the MPU (modular switch) or switch (fixed switch) and number of remaining validity days. The system supports the following license states: Normal: The license is in active state. - Demo: The license is in demo state. - Trial: The license has expired but still valid during the trial period. Emergency: The license is in emergency state. Default: No license file needs to be activated or the license file has expired. Note: The preceding command displays information only when the switch has activated license file. If the switch does not have an activated license file, no information is displayed. Run the display license resource usage command to display the usage of the resource items defined in a license file. Resource usage refers to the percentage of resources used out of resources defined by the license file.

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

STP configurations on S series switch
Common STP configuration for S series switches (except S1700 switches) and E series switches: 1. Enable STP/RSTP globally. Run the stp enable command in the system view. [HUAWEI] stp enable 2. Enable STP/RSTP on an interface. Run the stp enable command in the interface view. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] stp enable 3. Disable STP/RSTP globally. Run the undo stp enable command in the system view. [HUAWEI] undo stp enable 4. Disable STP/RSTP on the interface. Run the undo stp enable command in the interface view. [HUAWEI] interface gigabitethernet 1/0/1 [HUAWEI-GigabitEthernet1/0/1] undo stp enable For details of other configuration commands, see "Common STP/RSTP Operations" in Series Switches Common Operation Guide. Common STP/RSTP operations are the same for all switch models.

Can the VPM220 be connected to an audio mixing console?
The VPM220 can be connected only to a Huawei endpoint through a proprietary cable. It cannot be connected to an audio mixing console.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top