CX915 zone configuration

3

CX915 FC switch module zone configuration:
For details, see Configuring the CX915 in the CX915 User Guide.
CX915 User Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000053380/?idPath=7919749|9856522|21782478|19955021|19961380
You can also refer to the deployment guide:
http://support.huawei.com/enterprise/en/doc/DOC1000038842/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Other related questions:
CX915 ports
The CX915 provides the following external ports: ? Two serial ports: one BMC port and one SYS port ? Twelve GE electrical ports ? Four 10GE optical ports ? Eight 8G FC optical ports The CX915 provides the following internal ports: ? Thirty-two GE ports, which are connected to half-width compute node slots 1 to 16. ? Two GE ports, which are connected to the two MM910s respectively to communicate with them. ? Twelve FCoE ports, which are connected to half-width compute node slots 1 to 12. ? Four FC ports, which are connected to half-width compute node slots 13 to 16.

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Powering off an E9000
Power off an E9000 as follows: 1. Power off the blades or switch modules in an E9000 chassis using the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html. 2. Disconnect the E9000 power cable from the mains supply.

Adjusting OceanStor 9000's zones and zone attributes
Procedure for adjusting OceanStor 9000's zones and zone attributes: 1. Log in to DeviceManager. 2. Check licenses in the storage system. Load balancing provided by the InfoEqualizer feature is a value-added feature, so you must ensure that each license file in the storage system includes information about InfoEqualizer. Choose Settings > License Management > Active License and check whether the activated licenses contain information about InfoEqualizer. If information about InfoEqualizer is not contained, follow the displayed instructions to import and activate the required license. 3. Create a zone. OceanStor 9000 has a default zone root. Administrators can create more zones based on service requirements. The owning subnet of a zone can be configured using the subnet CONFIGURE item in zone CONFIGURE. a. Choose Settings > Cluster Settings > InfoEqualizer > Zone Management. b. Click Create. In the Create Zone dialog box, enter the required information and click OK. 4. Migrate nodes. After zones are created, nodes can be migrated from the root zone to other newly created zones. a. In the zone list, select a newly created zone. b. Click Add above the node list. c. In the Add Node dialog box that is displayed, select nodes that you want to migrate to the zone and click OK. Note: The Add Node dialog box displays nodes in the root zone.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top