CX915 FC configuration

21

The following documents describe the CX915 FC switching plane configuration:

CX915 User Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000053380/?idPath=7919749|9856522|21782478|19955021|19961380

Deployment Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000038842/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

MX510 Command Reference:
http://support.huawei.com/enterprise/en/doc/DOC1000015908/?idPath=7919749|9856522|21782478|19955021|19961380

Other related questions:
CX915 ports
The CX915 provides the following external ports: ? Two serial ports: one BMC port and one SYS port ? Twelve GE electrical ports ? Four 10GE optical ports ? Eight 8G FC optical ports The CX915 provides the following internal ports: ? Thirty-two GE ports, which are connected to half-width compute node slots 1 to 16. ? Two GE ports, which are connected to the two MM910s respectively to communicate with them. ? Twelve FCoE ports, which are connected to half-width compute node slots 1 to 12. ? Four FC ports, which are connected to half-width compute node slots 13 to 16.

How to configure an FC interface on a CE series switch
Before configuring an FC interface, install an FC optical module. If the LINK indicator of a service interface is steady green, the interface is in Up state. # Switch 10GE1/0/1 to an FC interface. system-view [~HUAWEI] port mode fc 10ge 1/0/1 Warning: This operation will cause all the other configurations on the port to be lost. Continue? [Y/N]:y [*HUAWEI] commit # After configuring an FC interface, check the interface status. If the physical state and protocol state of the interface are both UP, the interface has been enabled. [~HUAWEI] display interface fc 1/0/1 FC1/0/1 current state : UP (ifindex: 144) Line protocol current state : UP ......

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

Do CE series switches support the FC function
CE series switches support the FC function in V100R005C10 and later versions. Currently, only the CE6850U-HI supports the FC function.

Powering off an E9000
Power off an E9000 as follows: 1. Power off the blades or switch modules in an E9000 chassis using the MM910 Web interface. For details, see http://support.huawei.com/ehedex/pages/DOC1000053358YEF0907R/08/DOC1000053358YEF0907R/08/resources/en/osca/smma_help_r2/it_osca_smma_900020.html. 2. Disconnect the E9000 power cable from the mains supply.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top