Whether the CX915 supports L3 switching

1

The CX915 supports L3 switching.

Other related questions:
Whether the CX311 supports L3 switching
The CX311 supports L3 switching.

Whether USG firewalls support VLAN communications through L3 subinterfaces
The USG firewalls support VLAN communications through L3 subinterfaces.

CX915 ports
The CX915 provides the following external ports: ? Two serial ports: one BMC port and one SYS port ? Twelve GE electrical ports ? Four 10GE optical ports ? Eight 8G FC optical ports The CX915 provides the following internal ports: ? Thirty-two GE ports, which are connected to half-width compute node slots 1 to 16. ? Two GE ports, which are connected to the two MM910s respectively to communicate with them. ? Twelve FCoE ports, which are connected to half-width compute node slots 1 to 12. ? Four FC ports, which are connected to half-width compute node slots 13 to 16.

Does the L2/L3 interface of an interface card of an AR router support being converted to be working in L3 mode
Check whether the Layer 3 Ethernet interface is switched over to a Layer 2 Ethernet interface. The procedure of converting the Layer 2 mode of a physical interface to the Layer 3 mode is as follows: 1. Choose LAN access > LAN > Physical interface to enter the physical interface configuration page. 2. In the operation column of the physical interface list, click the icon at the right side of details corresponding to a desired physical interface to switch over the physical interface between Layer 2 mode and Layer 3 mode. 3. In the prompt dialog box, click Yes to confirm the switchover.

Default user name and password of the CX91x
The default user name and password of the BMC and onboard Ethernet switching plane of the CX91x are as follows: Default user name: root Default password: Huawei12#$ In some cases (such as serial port login and BIOS login), you only need to enter the password but do not need to enter the user name. The default user name and password of the FC switching plane (available only for CX911 and CX912) are as follows: Default user name: admin Default password: Huawei12#$

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top