CX913 indicators

1

The CX913 supports the following indicators:
? Power indicator (PWR) (this indicator applies only to the C00 version):
Off: The switch module is not powered on.
Blinking green: The switch module is being powered on.
Steady green: The switch module is operating properly.

? Stacking status indicator (SATA) (this indicator applies only to the C10 version):
Off: The switch module is not powered on.
Blinking green (the first 10 times): The switch module is being powered on.
Blinking green: The switch module is standby in stacking mode and is operating properly.
Steady green: The switch module is active in stacking mode or is not stacked, and is operating properly.

? Health status indicator (HLY):
Off: The switch module is not powered on.
Steady green: The switch module is operating properly.
Blinking red (1 Hz): A major alarm is generated.
Blinking red (4 Hz): A critical alarm is generated.
Blinking red (5 Hz): The switch module is not securely installed.

Offline button/indicator (OFL): currently invalid (reserved)

? Data transmission status indicator for the 10GE optical port:
Off: No data is being transmitted over the port.
Blinking orange: Data is being sent or received over the port.

? Connection status indicator for the 10GE optical port:
Off: The port is not connected or not properly connected.
Steady green: The port is properly connected.

? Data transmission status indicator for the 8G FC optical port (A):
Off: No data is being transmitted over the port.
Blinking orange (twice/second): A high temperature alarm has been generated if the green indicator (L) is blinking twice per second at the same time.
Blinking orange (more than twice/second): Data is being sent or received over the port.

? Connection status indicator for the 8G FC optical port (L):
Off: No optical module is installed, or an exception occurs when the port is receiving optical signals.
Steady green: The port is properly connected.
Blinking green (once/second): The device is registering or the port is in the diagnosis state.
Blinking green (twice/second): The port is not properly connected or the port is faulty. If the orange indicator (A) is blinking twice per second at the same time, a high temperature alarm has been generated.

Other related questions:
Whether the CX913 supports GE or 10GE ports
The CX913 panel provides 16 x 10GE optical ports. The ports adapt to GE ports.

Indication of the red alarm indicator on the Metro 1000
If the alarm indicator on the Metro 1000 is steady red, a critical alarm is generated. You need to check it on the NMS.

Meaning of colors of interface indicators on the S1700
For details about the meaning of each color of the indicators on the S1700, click S1700 Products Description and choose Hardware Structure > Indicator.

Indication when the SRV indicator on the TOM board is red
The SRV indicator is a service alarm indicator. The indicator status is described as follows: On (green): The service is normal. On (red): A critical or major service alarm is present. On (yellow): A minor or remote service alarm is present. Off: No service is configured.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top