CX913 CLI login methods

0

You can log in to the CX913 CLI by using the following modes:
? SSH mode (remote)
? SOL mode (remote)
? SYS serial port mode (local, a BMC serial port is required for plane switchover)

For details, see Logging In to the CLI of Each Switching Plane in the user guide.
CX913 User Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000036345/?idPath=7919749|9856522|21782478|19955021|19961380

Other related questions:
Number of concurrent server BMC connections
The WebUI of server iBMC or iMana supports a maximum of four concurrent logins. The CLI supports a maximum of five concurrent logins.

How can I disable the MCU web login function in CLI mode?
To disable the MCU web login function in CLI mode, perform the following operations: Log in to the MCU main control board in Telnet or SSH2 mode (the user name and password are admin and admin or admin and Change_Me). Access the system configuration interface. Then, run the following commands: sys [HUAWEI VP9630]telnet-config [HUAWEI VP9630-Telnet]enable- enable-http enable-logon enable-network-login enable-security-mode //Set enable-http to 0 to disable the web login function. [HUAWEI VP9630-Telnet]enable-network-login enable-network-login [HUAWEI VP9630-Telnet]enable-network-login - mode{0:only enable FE0, 1:only enable GE0, 2:only enable GE1 3:enable all interface, default:3} //For security purposes, you may need to disable some ports.

Whether the CX913 supports GE or 10GE ports
The CX913 panel provides 16 x 10GE optical ports. The ports adapt to GE ports.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top