CX913 Ethernet switching configuration

2

The following documents describe the CX913 10GE switching plane configuration:

CX913 User Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000036345/?idPath=7919749|9856522|21782478|19955021|19961380
E9000 Deployment Guide:
http://support.huawei.com/enterprise/en/doc/DOC1000038842/?idPath=7919749%7C9856522%7C21782478%7C19955021%7C19961380

Switch module Ethernet configuration summary:
http://support.huawei.com/huaweiconnect/enterprise/forum.php?mod=viewthread&tid=228251

Other related questions:
Configuring an Ethernet subinterface on the firewall
Configure the Layer 3 Ethernet subinterface as follows: 1. Run the system-view command to access the system view. 2. Run the interface interface-type interface-number.subinterface-number command to access the Ethernet subinterface view. 3. Run the ip address ip-address { mask | mask-length } [ sub ] command to configure the IP address of the Ethernet subinterface. 4. Run the vlan-type dot1q vlan-id command to configure the encapsulation type for the Ethernet subinterface and associate a VLAN ID with the subinterface. Configure the Layer 2 Ethernet subinterface as follows: 1. Run the system-view command to access the system view. 2. Run the interface interface-type interface-number command to enter the interface view. 3. Run the portswitch command to configure a Layer 3 Ethernet interface to work in Layer 2 mode. 4. Run the quit command to return to the system view. 5. Run the interface interface-type interface-number.subinterface-number command to create a subinterface and access the subinterface view. 6. Run the vlan-type dot1q vlan-id command to configure the encapsulation type for the subinterface and associate a VLAN ID with the subinterface. 7. Run the portswitch command to configure the subinterface as a Layer 2 subinterface.

Whether the CX913 supports GE or 10GE ports
The CX913 panel provides 16 x 10GE optical ports. The ports adapt to GE ports.

Method used to secure Ethernet switches in the cabinet
Method used to secure Ethernet switches in the cabinet: Install mounting ears matching Ethernet switches and secure Ethernet switches by securing the mounting ears in the mounting bar on the cabinet.

How can I secure an Ethernet switch in a cabinet?
You can secure an Ethernet switch in the cabinet by securing the accompanying mounting ears of the Ethernet switch to the channels.

If you have more questions, you can seek help from following ways:
To iKnow To Live Chat
Scroll to top